wireless deployment using IAS

Discussion in 'Windows Networking' started by =?Utf-8?B?cm9vdA==?=, Feb 5, 2004.

  1. I was wondering if someone could help or give me some hints on how to deploy wireless access using Internet Authentication Services (IAS) on windows 2003

    What I am trying to accomplish is to create a secure connection in my network. I could just enable WEP on the access point, but I want a more secure approach due to the sensitive of the data being tranfer. I'm also low in budget, so going the Cisco way is out the question (to much money)

    These are the devices that I have so far

    1- Netgear Access Point (WG602 v2
    1- Windows 2003 server runing active directory
    1- Client laptop runing windows XP using a wireless adapter (netgear adapter

    This is what I have done so far

    I set the wireless access point. I setup the Windows 2003 server with active directory enable. I also anable to IAS on the server (I have not configure anything yet within IAS). My laptop is able to connect to the domain with out a problem

    What do I do next..???

    My netgear access point have the following option (which I believe is the one to use for RADIUS server

    Security Settings
    Wi-Fi Protected Access with pre-shared key (WPA-PSK)

    Security Type: WPA-PSK

    Use WPA with pre-shared key
    Password Phrase_________(8-63 characters)

    Do I need to set up a RAS? How do I configure the WinXp client machine

    Thanks in advance, I hope that everything makes sense
     
    =?Utf-8?B?cm9vdA==?=, Feb 5, 2004
    #1
    1. Advertisements

  2. Couple of links you may want to look at if you haven't already that may
    help..

    Step-by-Step Guide for Setting Up Secure Wireless Access in a Test Lab
    http://www.microsoft.com/downloads/...familyid=0f7fa9a2-e113-415b-b2a9-b6a3d64c48f5

    Implementing a WLAN Test Environment
    http://www.microsoft.com/technet/tr...r2003/proddocs/deployguide/dnsbm_wir_ezso.asp


    --

    Hope that helps,
    David Copeland
    Microsoft Small Business Server Support

    This posting is provided "AS IS" with no warranties, and confers no rights.

    Newsgroups:
    SBS v4.x : microsoft.public.backoffice.smallbiz
    SBS 2000: microsoft.public.backoffice.smallbiz2000
    SBS 2003: microsoft.public.windows.server.sbs


    deploy wireless access using Internet Authentication Services (IAS) on
    windows 2003.
    network. I could just enable WEP on the access point, but I want a more
    secure approach due to the sensitive of the data being tranfer. I'm also low
    in budget, so going the Cisco way is out the question (to much money).
    active directory enable. I also anable to IAS on the server (I have not
    configure anything yet within IAS). My laptop is able to connect to the
    domain with out a problem.
     
    David Copeland [MSFT], Feb 5, 2004
    #2
    1. Advertisements

  3. Thanks a million Davd!

    I will get on the ball and see if I can get this deployment going.
     
    =?Utf-8?B?cm9vdA==?=, Feb 5, 2004
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.