WEP - connects/disconnects every 2 seconds.

Discussion in 'Wireless Internet' started by Steve Pearce, Jan 12, 2004.

  1. Steve Pearce

    Steve Pearce Guest

    I have a Netgear ME102 Access point (Rev B with the latest firmware)
    and laptop using a D-Link DWL-610 card. Setup has been working for a
    number of months without WEP.

    If I enable 128-bit WEP on both devices using the same key, the laptop
    connects but then the connection drops almost immediately. It then
    reconnects/disconnects every 2 seconds. I'm sure the key is correct,
    if I enter an invalid key for the DWL-610 then it will not even
    connect.

    For now I've had to disable WEP and have settled for MAC filtering.

    Anyone have any ideas how I might be able to get WEP working with
    these two devices?

    Steve
     
    Steve Pearce, Jan 12, 2004
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.