VPN 13801: IKE authentication credentials are unacceptable.

Discussion in 'General Networking Discussion' started by zillah, Oct 13, 2017.

  1. zillah

    zillah

    Joined:
    Nov 17, 2009
    Messages:
    5
    Likes Received:
    0
    Dear Experts

    I contacted Teleco forum since 6 days and I couldn't get any help yet

    I am using router that was provided by teleco (Netgear), and I configured the VPN as per the guideline below page 5 and my router snapshot configuration attached.

    Even I used the same username as in the guideline to make sure I am following step by step

    https://www.telstra.com.au/content/...tra-gateway-pro-v7610-configuration-guide.pdf

    https://imgur.com/a/LLSS2

    Actually not much to configure at VPN server side (Telco ADSL router)

    At the client side desktop windows 7 I disabled the firewall disabled and I configured the connections as per page 36 onward.
    page 36 starts with :
    3.5.2.2 Configuring a Windows 7 Agile VPN Connection

    I didn't need to install any certification as I believe this was not applying to my case ? Am I right ?

    I can't get it work although I checked the added username and password, I can't figure out what I am missing ?

    Error attached as well

    https://imgur.com/a/iwPb4

    Thanks
     

    Attached Files:

    zillah, Oct 13, 2017
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.