Trying to ping inside network 2003 Server Ras

Discussion in 'Windows Networking' started by JH, Jul 6, 2007.

  1. JH

    JH Guest

    Hello,
    I must be missing something big here but I had to reinstall Routing and
    Remote Access on my 2003 server SP1 today. I created a pool of 3 static
    addresses. The addresses I created are on the same network as the server that
    is hosting the ras server. Unfortuanately, you cannot specify the subnet for
    these addresses and since it's only three addresses msoft assigns it a subnet
    that relates to a 3 host network. Is there any way I can specify this? When I
    connect, I cannot ping anywhere on the same network. All I want to do is RDP
    to one server. Is there anything I'm missing that is obvious?
     
    JH, Jul 6, 2007
    #1
    1. Advertisements

  2. Assuming they are in the same subnet, have you enabled the IP routing? This link may help,

    VPN SetupTo modify the filters, go to RRAS>IP Routing>General, right-click the external adapter and select Properties. Which ports need to be opened for running VPN ...
    http://www.chicagotech.net/vpnsetup.htm


    Bob Lin, MS-MVP, MCSE & CNE
    Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
    How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
    Hello,
    I must be missing something big here but I had to reinstall Routing and
    Remote Access on my 2003 server SP1 today. I created a pool of 3 static
    addresses. The addresses I created are on the same network as the server that
    is hosting the ras server. Unfortuanately, you cannot specify the subnet for
    these addresses and since it's only three addresses msoft assigns it a subnet
    that relates to a 3 host network. Is there any way I can specify this? When I
    connect, I cannot ping anywhere on the same network. All I want to do is RDP
    to one server. Is there anything I'm missing that is obvious?
     
    Robert L [MVP - Networking], Jul 6, 2007
    #2
    1. Advertisements

  3. JH

    JH Guest

    Yes, IP Routing is enabled. I'm not using this connection as a vpn, just dial
    up.
     
    JH, Jul 6, 2007
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.