TCP/IP Question

Discussion in 'Network Routers' started by cc0293935, Nov 8, 2004.

  1. cc0293935

    cc0293935 Guest

    Hello:
    I have a network of about 5 XP workstations connected to a Linksys router
    and a DSL modem. I want to assign each workstation a static IP address so I
    can have a map of the routers, APs and the network printers. When I do this,
    I can access the network, but not the internet. Immediatley when I say
    assign the IP automatically I have internet access.

    I'm lost.
    Thanks.
     
    cc0293935, Nov 8, 2004
    #1
    1. Advertisements

  2. cc0293935

    John Dulak Guest

    sjeprises:

    As well as assigning static IP addresses to the client PCs you have to
    enter the IP address of the router as the "DNS Server" and as the
    "Default Gateway". You can find these settings in TCP/IP -> <Your NIC>
    properties tab.

    HTH & GL

    John
    --
    \\\\\//
    "Don't take life so seriously... | |
    ...it's only a temporary condition." (.) (.)
    ========================================oOO==(_)==OOo==
    _____________________________________________
    | John G. Dulak |
    | Gnomeway Services |
    /)| E-mail me from my home page at: |(\
    / )| http://users.telerama.com/~jdulak/email.htm |( \
    ( (|____________________________________________ |) )_
    ((( \ \ > /_) ( \ < / / )))
    (\\\ \ \_/ / \ \_/ / ///)
    \ / \ /
    \ _/ \_ /
    / / \ \
     
    John Dulak, Nov 8, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.