Splitting NIC cards into 2 vlans 1 for RDP and other for SERVER to server

Discussion in 'Windows Networking' started by Jerry Alan Braga, Jun 24, 2009.

  1. I have a situation where I would like to utilitize the 2 nic cards on my hp
    dl380 server to isolate traffic and improve performance. All of our users
    here use a thin client PC via linux cdrom boot software to RDP into our 2003
    terminal servers. These servers than talk to our database server when
    running applications. What I would like to do is split the nic card on the
    terminal server so that RDP traffic and regular user traffic flows thru 1
    and the other is use to communicate to the DB server. We already have VLANS
    set on different ip segments for our servers and the RDP users.

    Servers vlan is 10.73.10.x where TS server is and my DB server
    my RDP thin client users vlan is -

    What I am thinking is to split the teamed nics and assign 1 nic to and leave the other as
    Now when users RDP to the server they will use the dns entry for
    not This will then elimiate a hop on my layer 3 switch since
    they are on the same subnet.

    My question is since the server has 1 netbios name what IP will be assigned
    to that, the .10 or .30 segment. I will still like the netbios name to be
    assigned to the original address.

    Also how can I the TS server to use the other nic directly to get to the .10
    segment so that every packet requiring to get to the .10 segment does not
    leave the server on the .30 nic and hit our layer 3 switch to get to the .10
    segment and back.

    Jerry Alan Braga, Jun 24, 2009
    1. Advertisements

  2. If there is no current overloading of the "path" in use now,..then you are
    trying to solve an imaginary problem that does not exist.

    Nebios can be a mess.

    191611 - Symptoms of Multihomed Browsers

    Here are some other considerations:

    Microsoft Windows XP - Multihoming Considerations

    159168 - Multiple Default Gateways Can Cause Connectivity Problems
    Phillip Windell, Jun 24, 2009
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.