Sitecom 54g card and connection with Belkin 54g router

Discussion in 'Wireless Internet' started by Albert Kilsdonk, Sep 7, 2003.

  1. Albert Kilsdonk

    Albert Kilsdonk Guest

    I buileded a network with a Belkin 54g router for ADSL and PCI-cards 54 from
    Sitecom. What a misery that was. It took 5 days and hours with the Belkin
    Helpdesk (great guys !)
    The problem was caused by the pci-card, it appeared. I called two times the
    helpdesk if Sitecom and they were convinced that the problem was with
    Belkin. Belkin did their utmost best to help me out.
    But when I called Sitecom, after these 5 days, again, I got someone on the
    line (certain Eelco) who knew the answer immediately. "Oh, Belkin, than you
    just need to change some TCP/IP settings of the card".
    If you have the same problem: call them for the solution and insist to get
    the right answer.

    Much better: buy equipment of the same supplier

    Good luck
     
    Albert Kilsdonk, Sep 7, 2003
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Belkin 54g router dropping connection when hardwired

  2. Belkin 54g router dropping connection when hardwired

  3. Sitecom wl-105b AP en sitecom D201 do not communicate

  4. Getting WPA working with Broadcom 54g card and Linksys WRT54GS router

  5. Belkin access point and 54g wireless card

  6. A Belkin Pre-N router with Belkin Pre-N PCMCIA card : Question

  7. How to disable Sitecom manager software, and use windows connection manager?

Loading...