site to site vpn routing problem

Discussion in 'Windows Networking' started by Christopher S. Daane, Mar 3, 2004.

  1. Christopher S. Daane

    Christopher S. Daane Guest

    i have two server 2003 machines setup for site to site vpn
    connections.

    the first site has a subnet of 192.168.2.0
    the second site has a subnet of 192.168.1.0
    masks are 255.255.255.0 on all
    the connections works fine and the static routes are configured as
    follows

    first site 192.168.2.0
    second site 192.168.1.0

    i am unable to ping from a client behind the first router and get a
    response from a client on behind the opposing router. however i can
    ping the other router with its respective ip address on the other
    subnet, 192.168.1.110 from the client of 192.168.2.5. the reverse is
    also true from the other side.

    so i have clients on both networks that cannot see each other, but can
    only see the router of the other subnet that it is connected to, and
    nothing else.?

    any suggestions?
     
    Christopher S. Daane, Mar 3, 2004
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. routing problem site to site

  2. another vpn wins site to site to site problem*

  3. site to site routing through VPN

  4. 2 NICs + Site-to-Site VPN + Http proxy = problem

  5. PPTP Site-to-Site VPN problem

  6. VPN Site-to-Site problem with RRAS on Win2k3svr

  7. Site-to-Site VPN client routing question - clients at branch office not able to access network at HQ

  8. Site to Site VPN routing issues

Loading...