Scripting solution needed for DHCP and trusted PDC/DHCP servers.

Discussion in 'Windows Networking' started by Scott Cooper, Jul 15, 2004.

  1. Scott Cooper

    Scott Cooper Guest

    I have to obtain scope information from a large number of remote DHCP
    servers that are also NT4 PDC servers. WMI is installed on each server but I
    can't locate a method to get the scope information. I would really
    appreciate someone's help to get this information.

    Thanks in advance,
    Scott Cooper
     
    Scott Cooper, Jul 15, 2004
    #1
    1. Advertisements

  2. Doug Sherman [MVP], Jul 15, 2004
    #2
    1. Advertisements

  3. Scott Cooper

    Scott Cooper Guest

    Thank you Doug but the DHCP servers are NT4 which is not compatible with
    this command.

    For anyone monitoring this thread, I did find a workaround. Its not pretty,
    but it seems viable. The registry contains configuration details in the
    services section for DHCPServer. Many of the key values use hex or binary
    and using DHCPCMD can provide some dynamic data like reservation & lease
    information but unfortunatly, this command is also limited obtaining
    information remotely from an NT4 DHCP.

    Thanks again, and I am still on the lookout for a better utility or method
    than what I am doing now.

    Scott
     
    Scott Cooper, Jul 16, 2004
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.