RRAS via windows

Discussion in 'Software' started by Micky, Feb 8, 2016.

  1. Micky

    Micky

    Joined:
    Feb 8, 2016
    Messages:
    1
    Likes Received:
    0
    Hi everybody,

    I'm new to this forum and to networking and would seek for your assistance to proceed with a networking task using Windows server 2008 or Win 2012 features.

    So here is the scenario:

    Network A is as follows:
    10.0.0.XXX with gateway .100

    Other reachable network segments in this network is as follows:
    172.20.10.YYY
    200.100.150.ZZZ

    Note: I can ping; RDP IP within any of the range listed above.

    Network B:
    - Has got 2 ADSL routers with .200 and .240 as default gateway respectively.
    DG used by users: .200
    DG used by servers .240

    IP for users: 10.0.0.200 /24
    IP for server: 10.0.0.240/24

    Objective:

    We want to connect Network B to Network A by using Windows feature and users in Network B need to be able to connect to servers in Network A and ping 200.100.150.ZZZ and 172.20.10.YYY range without issue.

    Can you please advise how to achieve that via Windows server (2008 or 2012) ?

    Thks
     
    Micky, Feb 8, 2016
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.