Remote Printing

Discussion in 'General Networking Discussion' started by mr X, Oct 27, 2012.

  1. mr X

    mr X

    Joined:
    Oct 27, 2012
    Messages:
    1
    Likes Received:
    0
    Hey everybody, this is my first post. And for that I start off with a question: how could I have printers on different networks be printable to?
    Let me explain. We have 3 buildings, each have their own connection to the internet. For example, we need employees to be able to print from building 1, to building 2,or building 3 to building 1, so they can have their document ready when they go to the other building. It is not possible to network the buildings together, which would have costed way too much.

    All of the printers are network connected and ready, so if you are in building 2, you can network print to any of the printers in the building. Is there a simple solution for this issue? Thanks in advance. :p
     
    mr X, Oct 27, 2012
    #1
    1. Advertisements

  2. mr X

    howardrya

    Joined:
    Sep 16, 2012
    Messages:
    5
    Likes Received:
    0
    There is a way to do so but I am not totally sure, how about you go ask on a cisco networking forum
     
    howardrya, Oct 28, 2012
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.