Problems with Symbol Wireless Switch

Discussion in 'Wireless Internet' started by dcox, Jul 12, 2006.

  1. dcox

    dcox Guest

    I am trying to set up this WS-5100 switch.

    LAN on ETH2. 192.168.9.123/255.255.255.0
    gateway 192.168.9.3


    WLAN on ETH1. 192.168.31.20/255.255.255.0
    Gateway : 192.168.31.1

    I can see (ping https) switch fine from wired LAN. But can not ping
    anything on wireless side of switch.

    I can ping adrress on ETH1 from wireless network but can not access
    anything on wired network.

    I saw in manual that both ports need to have the same gateway. It also
    says that ETH1 and ETH2 can not be in the same broadcast domain.

    If I try to put the "real" gateway in for the 192.168.31.x the switch
    locks-up.

    If I try to give both ports 192.168.31.x addresses, the switch
    locks-up.

    thanks.

    dc
     
    dcox, Jul 12, 2006
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.