Problem using USB to Serial adapter(GUC232A) for a serial modem

Discussion in 'Linux Networking' started by Shanthi Paladugu, May 21, 2004.

  1. Hello

    I have IOGEAR GUC232A USB Serial(DB9 pin) adapter connected to the USB
    port of my Linux (2.4.19) machine and a MultiTech serial modem. The
    adapter works on Windows as I could issue commands to the modem
    through HyperTerminal.

    The Linux machine detects the adapter when it is plugged in. The
    modules loaded are the following:
    usb-ohci.o
    usbcore.o
    usbserial.o
    pl2303.o


    But I am not able to see anything when connected to /dev/ttyUSB0 thru
    minicom

    Any help on this will be appreciated.

    Thanks,
    Shanthi.
     
    Shanthi Paladugu, May 21, 2004
    #1
    1. Advertisements

  2. Shanthi Paladugu

    lc Guest

    ~~~~~~~~~~~~~~~~~~
    may be type "ate1" in minicom will help you
     
    lc, May 21, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.