PCAnywhere and a Linksys BEFSR41 v2 router

Discussion in 'Network Routers' started by AnytimeAnywhere, Aug 13, 2004.

  1. I have a remote office with a Linksys BEFSR41 v2 router. I want to be able
    to access the 5 PCs there with PCAnywhere. I am only able to access 1 PC
    with port forwarding. Any other TCP/IP addresses that I try to port forward
    will not work with PCAnywhere. Will this router only work with 1 PCAnywhere
    session? I tried changing the ports on PCAnywhere and on the router
    (through port forwarding) but got nothing. I am using v10.5 of PCAnywhere.


    AnytimeAnywhere, Aug 13, 2004
    1. Advertisements

  2. AnytimeAnywhere

    Edog Guest

    That's the approach you need to take.

    You can make machine A listen on port 56311 and 56321 machine B listen
    on 56312 and 56322 and so on. Then you forward those ports to the
    correct IP address. That should allow one external IP to respond for all
    X number of machines.
    Edog, Aug 15, 2004
    1. Advertisements

  3. Thanks for the reply. It turns out that the firmware needed to be upgraded
    to do this.


    AnytimeAnywhere, Aug 19, 2004
  4. AnytimeAnywhere

    IT Guy Guest

    For clarification, we are talking about the Linksys box that you need to
    do the firmware upgrade on?

    IT Guy, Aug 19, 2004
  5. Correct.

    AnytimeAnywhere, Aug 20, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.