Network flow splitting using "net use" command

Discussion in 'Windows Networking' started by Didier P, Dec 7, 2005.

  1. Didier P

    Didier P Guest

    We have a Windows 2003 domain with several machines (all of these machines
    are Windows 2003 machines). These machines have each several network
    interfaces. Each network interface is part of a VLAN. The idea is to split
    the network trafic in order to improve security and to not merge all the
    traffic. These machines share directories.
    For example :
    MachineA have @IP 10.0.0.1(mask 255.255.255.0), 10.0.1.1(mask
    255.255.255.0), 10.0.2.1(mask 255.255.255.0) and this machine shares
    directories DataShared1, DataShared2, DataShared3
    MachineB have @IP 10.0.0.2(mask 255.255.255.0), 10.0.1.2(mask
    255.255.255.0), 10.0.2.2(mask 255.255.255.0).
    From this MachineB, when we type : net use \\10.0.2.1\DataShared3 are we
    sure that the network traffic goes throught the VLAN 10.0.2.0(mask
    255.255.255.0)?
    If yes : if we can divide the network traffic by this way, can we do the
    same thing by using a name instead of @IP?
    And finally, if we can use name, how can we map name and @IP, without using
    lmhost, or WINS server (we have tried to use DNS server but it doesnt work :
    we have an error 52)?

    Thanks for your help.

    Didier
     
    Didier P, Dec 7, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.