Mn-700 / Internal Web Server

Discussion in 'Broadband Hardware' started by Chris Alberding, May 9, 2004.

  1. I recently upgraded from the mn-500 to the mn-700 and in
    that upgrade my prot forwarding stopped working to my
    internal web server.
    I as able to get to my server through the Mn-500 by
    setting up port forwarding, I have setup the mn-700 with
    the identical settings, but can no longer get a response
    from the weber server....any thoughts?
    I can also view my sever on the LAN by entering it's
    static IP, but cannot access it via the WAN through port
    forwarding.
     
    Chris Alberding, May 9, 2004
    #1
    1. Advertisements

  2. Chris Alberding

    paulo Guest

    The MN700 does not have loopback support. The MN500 does.
    Without loopback you cannot access the server using the
    WAN IP from within the LAN. People from outside the LAN
    should be able to access it.

    Try using a service like http://network-tools.com/ to
    check that the server is accessible from the outside
    (select HTTP Headers).
     
    paulo, May 9, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.