Medion Wireless router. How to perform factory reset?

Discussion in 'Network Routers' started by Tony, May 27, 2005.

  1. Tony

    Tony Guest

    Hi,

    While setting up a Medion Wireless router (recently bought from Aldi -
    Model MD 95038) I tried to remove the standard user/password
    combination (admin/admin used to work).

    I deleted the username and also the password and hit save.

    Now I can't get to administer anything with either the default or
    anything else. I tried pressing the reset button through a hole in the
    casing rear both with and without power on. Left it pressed for 30
    secs. Pressed it with power on, removed power and left it pressed for
    further 30 secs but nothing has reset it to factory admin
    name/password.

    There is nothing else available to press or fiddle with. It is still
    accesible by wired connection through default 192.168.0.100 IP address
    but I can't change any settings.

    Could anyone reveal or suggest any thing else to factory reset this
    device. I have not been able to get through to the help line.

    TIA. Tony.
     
    Tony, May 27, 2005
    #1
    1. Advertisements

  2. Tony

    Tony Guest

    Discovered that reset needs to be pushed, power disconnected, wait
    some seconds, reconnect power and still continue to press reset button
    for 20 more seconds. During the latter 20 seconds all the LEDs start
    to flash in unison and Hardware reset has occured.

    Including this for anyone with the same problem.
     
    Tony, May 27, 2005
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.