Looking for tool for configuring routers

Discussion in 'Network Routers' started by Jens Bretschneider, Apr 14, 2006.

  1. Hi,

    we're using many different type of routers, from many different
    manufacturers. Some need to be configured via SNMP, some via telnet and some
    via a serial console connection. I'm looking for a tool with a scripting
    language or something else which supports configuring these devices with
    predefined configuration files. For example on a cisco oder One Access
    Networks router, it should log in via serial console with username and
    password, go to conf t mode and enter the config line by line. On an
    Efficient Networks router, the cli is totally different with different
    prompts etc., and telnet can be used instead of the serial connection
    because these routers have a preconfigured ip address etc.

    Any Ideas?

    Regards,
    Jens
     
    Jens Bretschneider, Apr 14, 2006
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.