How to get the LAN IP of a machine ...

Discussion in 'Wireless Internet' started by laredotornado, Sep 27, 2005.

  1. Hello, I just purchased a D-Link Di-524 wireless router. My problem is
    that I have two machines hooked up to it -- one of which is a Linux
    Fedora Core 2 box whose video card is shot. Short of replacing it,
    does anyone know how I can determine its LAN IP address (e.g.
    192.168.0.101) through the router's admin panel? I am trying to make
    contact with that machine, but I do not know which destination IP I
    need to enter when I open a port in the router's firewall.

    Thanks for your help, - Dave
     
    laredotornado, Sep 27, 2005
    #1
    1. Advertisements

  2. laredotornado

    WRC Guest

    if it is setup for DHCP look for status and it should show all connected
    machines...
     
    WRC, Sep 28, 2005
    #2
    1. Advertisements

  3. See the DHCP page in the DI-524:
    http://support.dlink.com/emulators/di524/h_dhcp.html
    The list at the bottom will show all the DHCP assigned clients.
    You'll need to know the MAC address of your Linux box. It's either
    printed on the ethernet card or on the motherboard. If it's not easy
    to find, just use process of elimination with the other machines
    leaving only the Linux box.


    --
    # Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
    # 831.336.2558 voice Skype: JeffLiebermann
    # http://www.LearnByDestroying.com AE6KS
    # http://802.11junk.com
    # -cruz.ca.us
    #
     
    Jeff Liebermann, Sep 28, 2005
    #3
  4. Can you connect to the D-Link and check the DHCP and see what one's
    are in use/have been issued but the router???
     
    gene martinez, Sep 28, 2005
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.