Firewall Router BEFSX41 versus None Firewall Router BEFSR41

Discussion in 'Network Routers' started by R.P., Sep 28, 2004.

  1. R.P.

    R.P. Guest

    Hi all,
    Always wondered the difference between two routers (BEFSX41 & BEFSR41). It
    "says" on the box regarding the BEFSX41 "Firewall" router. The other router
    (BEFSR41) doesn't say this, but if you go into the firmware of this router
    (BEFSR41), you can turn the firewall on?? Never did understand this.
    I want to buy a Linksys 8 port firewall router, but the box for the 8 port
    (BEFSR81) doesn't say it is a Firewall router, but again, you can go into
    the firmware and turn the firewall on.
    I would really like somebody to explain all of the above.
    Thank you and have a good day,
    R.P.
     
    R.P., Sep 28, 2004
    #1
    1. Advertisements

  2. I have both and there is no where in the SR41 where you can turn on a
    firewall. SR41 does NAT
    The SX41 however has SPI (stateful packet inspection) and has a firewall
    tab. I dont know if they make a SX81, however the SX41 with a switch will
    do just as good as an 8 port router... all traffic goes through NAT and SPI
    before getting to computers.

    KK
     
    Kaptain Krunch, Sep 29, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.