Extend WiFi range of 450TC2 router using G604T/2640T

Discussion in 'Routers and Switches' started by provella, Mar 8, 2015.

  1. provella

    provella

    Joined:
    Mar 8, 2015
    Messages:
    1
    Likes Received:
    0
    I have Beetel 450TC2 ADSL Modem Router connected to ISPs RJ 11 (Phone Line - DSL) at ground floor of my home. All devices 3 laptops and 3 Android Phones (Yureka, Mi3 and Samsung S5) are connected over WiFi and enjoy good signal n speeds on ground floor and front half of first floor.

    I need WIFI n Internet connectivity at full first and second floor and possibly 3rd floor (if not asking too much)

    I have spare D-Link DSL-G604T and D-Link DSL-2640T, WiFi ADSL modem routers.

    Primary DSL Modem Router Beetel 450TC2 has PPPoE Airtel Connection with dynamic ip from ISP. My DSL is on 24x7.
    IP Address: 192.168.1.1 255.255.255.0

    Laptops n Smartphones get anything like 192.168.1.2 - 9 at max and even more when guests are here.

    I do not have option to connect the 450TC2 and G604T /2640T using wire (Phone or CAT 5/6 or Electric) as per design of house building.

    I cannot use G604T /2640T as primary router.

    I do see WDS setting in Beetel 450TC2 but not in G604T /2640T.

    I have not changed anything on 450TC2, however i have RESET G604T /2640T and then changed following using wired lan connection between PC n G604T / 2640T

    IP of G604T /2640T to 192.168.1.254
    Wireless SSID n Channel to be same as 450TC2 i.e. SabharwalHome and 1
    DHCP at G604T /2640T has been disabled.

    No ATM/PPP settings have been configured as the G604T /2640T devices have been HARD RESET using the button provided.

    Please help!
     
    provella, Mar 8, 2015
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.