Error 913 on VPN logon

Discussion in 'Windows Networking' started by Julian, Jan 19, 2008.

  1. Julian

    Julian Guest

    Hi

    I am receiving errors on a new set up of W2K3 VPN. The users have the
    access permissions and the port is open on the firewall.

    After entering the user name and password, the verification occurs and this
    message is displayed...

    Error Connecting to VPNConnectionName

    Error 913: A Remote Access Client attempted to connect over a port that was
    reserved for Routers only.

    The port is open and points to the internal IP 192.168.0.1 (the DC address).

    Help much appreciated!

    Julian
     
    Julian, Jan 19, 2008
    #1
    1. Advertisements

  2. In many cases, VPN error 913 is configuration issue. This search result may
    help.

    VPN error codeReceiving VPN error 619 while connecting to a VPN via SBC ...
    VPN Error 913 - A Remote Access Client attempted to connect over a port that
    was reserved for ...
    www.chicagotech.net/vpnerrors.htm


    --
    Bob Lin, MS-MVP, MCSE & CNE
    Networking, Internet, Routing, VPN Troubleshooting on
    http://www.ChicagoTech.net
    How to Setup Windows, Network, VPN & Remote Access on
    http://www.HowToNetworking.com
     
    Robert L. \(MS-MVP\), Jan 19, 2008
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.