EAP-PEAP with Windows 2000?

Discussion in 'Wireless Internet' started by Efrem Bottani, Jun 17, 2004.

  1. Hi all,
    someone knows if I can configure PEAP authentication with w2k clients?
    If yes, can you give me some indications.

    My need is to obtain a good protection and to authenticate per login or mac
    address, both controlled by the radius server.

    thanks in advance. Bye ... Efrem
    ----------------------------------------------------------------

    My test enviroment:

    Client
    ------------------------------------
    windows 2000 pro sp3
    Cisco 350 pcmcia wireless adapter
    ACU ver.6.1

    Acces Point
     
    Efrem Bottani, Jun 17, 2004
    #1
    1. Advertisements

  2. On Thu, 17 Jun 2004 01:36:44 GMT, Efrem Bottani spoketh
    I have not been able to get it working. Seems to be an issue with the
    W2K wireless client software not being able to send the EAP-Type
    properly, which gives me this error in the eventlogs:

    Event Type: Warning
    Event Source: IAS
    Event Category: None
    Event ID: 2
    Date: 5/26/2004
    Time: 12:27:37 PM
    User: N/A
    Computer: JUPITER
    Description:
    User nnnnnn\xxxxxx was denied access.
    Fully-Qualified-User-Name = a/b/c/d
    NAS-IP-Address = 192.168.0.4
    NAS-Identifier = 000c41123dc8
    Called-Station-Identifier = 000c41123dc8
    Calling-Station-Identifier = 000c412c2e0a
    Client-Friendly-Name = wap
    Client-IP-Address = 192.168.0.4
    NAS-Port-Type = Wireless - IEEE 802.11
    NAS-Port = 8
    Proxy-Policy-Name = Use Windows authentication for all users
    Authentication-Provider = Windows
    Authentication-Server = <undetermined>
    Policy-Name = Allow Wireless LAN Access
    Authentication-Type = PEAP
    EAP-Type = <undetermined>
    Reason-Code = 262
    Reason = The supplied message is incomplete. The signature was not
    verified.


    Lars M. Hansen
    http://www.hansenonline.net
    (replace 'badnews' with 'news' in e-mail address)
     
    Lars M. Hansen, Jun 17, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.