Do gas-filled windows block wireless signal?

Discussion in 'Wireless Networks' started by Don Phillipson, Jun 28, 2010.

  1. Wireless broadband was always marginal here (at least one
    mile from the tower, with trees in the line of sight ) and became
    impossible the day the windows were replaced with modern
    "Energy Star" units, double-pane sealed units filled with gas
    (either argon or krypton, I forget which.) I could not be sure of
    the cause, but managed to reach an ISP engineer. One of his
    suggestions was to try the directional wireless modem at an open
    window, i.e. no glass -- which immediately provided a satisfactory
    signal. I have instructions for various tests thus will quantify the
    difference if I can.

    The engineer said he had never heard of either window structure
    (aluminum here with steel magnets that hold the fly screens in place)
    or gas-filled sealed panes obstructing wireless signals. Has anyone else?
     
    Don Phillipson, Jun 28, 2010
    #1
    1. Advertisements

  2. Don Phillipson

    George Guest

    If the windows were touted as "low e" you found your problem. Various
    metal oxide coatings are either in the glass or coating the glass to
    lower the emissivity. Metal is also great for shielding RF.
     
    George, Jun 29, 2010
    #2
    1. Advertisements

  3. Don Phillipson

    Zolesz

    Joined:
    Jul 1, 2010
    Messages:
    10
    Likes Received:
    0
    "low e" type windows can cause this because they contain serious oxides and other gases and they can produce and artificial shield against the wireless signal so your connection will often drop, it will be very slow or even worst you will won't be able to connect.
     
    Zolesz, Jul 1, 2010
    #3
  4. Don Phillipson

    lightblub Guest

    Interesting, what else blocks wifi signals?
    I know microwaves seem to interfere with the wifi but what else??????
     
    lightblub, Jun 26, 2011
    #4
  5. Don Phillipson

    atec77 Guest

    Metal film like solar shield does , anything with metallic content will
    or you can defeat the signal with pure bulk
     
    atec77, Jun 26, 2011
    #5
  6. Don Phillipson

    lightblub Guest

    Interesting atec77, Conversely is there any way that you can make the
    signal better.
    I have heard a few methods but nothing concrete.
     
    lightblub, Jun 27, 2011
    #6
  7. Don Phillipson

    atec77 Guest

    You need to be specific as to your needs
     
    atec77, Jun 27, 2011
    #7
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.