Default Gateway Not Found

Discussion in 'General Networking Discussion' started by mgeorgetti, Apr 23, 2009.

  1. mgeorgetti


    Apr 23, 2009
    Likes Received:
    I am having a strange issue with a PC at the place that I work. The problem started with the user not being able to get onto the Internet. When I look at the ipconfig /all, I notice that there is a valid IP address, mask, etc. The only thing that is missing is the Default Gateway (it just shows up blank.) At first I thought it was the Linksys hub that is was plugged into but I took that out of the equation. I also switched ports on the HP ProCurve 2650 switch that the drop goes into and still the same thing. I can ping the gateway and if I manually enter the addressing information into the NIC, the PC works fine. The same is also happening to the other PC attached to the Linksys hub. Any help would be greatly appreciated. Thanks.
    mgeorgetti, Apr 23, 2009
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.