Debian SID and slmodem with Amilo L730

Discussion in 'Linux Networking' started by RaSca, Jun 21, 2005.

  1. RaSca

    RaSca Guest

    Hi Guys,
    I've installed the slmodem-2.9.10 package to make my winmodem work
    under my Debian SID.
    The module compiles in the right way and is also installed correctly in
    my own-compiled kernel, wich is the 2.6.11.
    The module slamr loads at startup and is also seen by the 3 programs
    i've tried : wvdial, kppp (which i would like to use) and gnome-ppp.
    The first problem is that when any of these programs try to do a dialup
    connection, i can't hear any sound so i had to wait and see what
    happens on the video. But that's the less.
    The real problem is that it can't do the connection. Look at the wvdial
    output:

    --> WvDial: Internet dialer version 1.54.0
    --> Cannot get information for serial port.
    --> Initializing modem.
    --> Sending: ATZ
    ATZ
    OK
    --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    OK
    --> Modem initialized.
    --> Sending: ATDT0,XXXXXXXXXXXX
    --> Waiting for carrier.
    ATDT0,XXXXXXXXXXXX
    CONNECT 50667
    --> Carrier detected. Waiting for prompt.
    User Access Verification
    Username:
    --> Looks like a login prompt.
    --> Sending: MYUSERNAME
    MYUSERNAME
    Password:
    --> Looks like a password prompt.
    --> Sending: (password)
    % Authentication failed.
    Username:
    --> Looks like a login prompt.
    --> Sending: MYUSERNAME
    MYUSERNAME
    Password:
    --> Looks like a password prompt.
    --> Sending: (password)
    % Authentication failed.
    Username:
    --> Looks like a login prompt.
    --> Sending: MYUSERNAME
    --> Don't know what to do! Starting pppd and hoping for the best.
    --> Starting pppd at Tue Jun 21 10:13:34 2005
    --> pid of pppd: 4263
    CSLIP: code copyright 1989 Regents of the University of California
    PPP generic driver version 2.4.2
    --> Using interface ppp0
    Caught signal #2! Attempting to exit gracefully...
    --> Terminating on signal 15
    --> Disconnecting at Tue Jun 21 10:13:55 2005

    I know for sure that username and password are correct, but it says
    authentication failed...It's an issue concerning PAP/CHAPS or what else
    ? What should i do ?

    Thank you so much.
     
    RaSca, Jun 21, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.