Ctrl-C in Windows VNC viewer, Redhat VNC server

Discussion in 'Linux Networking' started by sph042, Apr 26, 2005.

  1. sph042

    sph042 Guest

    I've got a redhat box running VNC server on it. I can connect fine w/ a
    Windows viewer and most things work fine. Ctrl-C doesn't seem to
    interupt though.

    $ stty -a
    speed 38400 baud; rows 24; columns 80; line = 0;
    intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
    eol2 = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase =
    lnext = ^V; flush = ^O; min = 1; time = 0;
    -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts
    -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon
    -iuclc -ixany -imaxbel
    opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0
    vt0 ff0
    isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop
    echoctl echoke

    $ echo ^C|hexdump
    0000000 0a03

    Ctrl-Z works fine, but Ctrl-C is not interrupting any programs. I have
    to Ctrl-Z out and then kill the process. Ctrl-C works fine from the
    local X server. The Ctrl-C seems to be generating the same ASCII 03
    from both the VNC viewer and local X server.

    Anyone have any ideas?
    sph042, Apr 26, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.