Concern over router config. remains.

Discussion in 'Windows Networking' started by Ben B, Jul 10, 2007.

  1. Ben B

    Ben B Guest

    Hello,

    The router in question is a Linksys BEFSR11 and has the Firmware Version
    1.46.2. The config. I have changed from Disable to Enable is Filter Internet
    NAT Redirection.

    My concerns expressed in my previous thread (first post) above, and in this
    quote, are unanswered:

    "This has left me with questions. Since I understand very very little about
    networking/routers and their settings I am wondering whether there are other
    errors in configuration" and

    "Appreciate guidance on the above and, if deemed necessary, I will post with
    the configurations of other pages".

    I am connected to the Internet but now have no confidence that my router is
    working effectively.

    My thanks.

    Ben.
     
    Ben B, Jul 10, 2007
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Multiple routers connected directly -- MTU concern?

  2. Windows 2000/2003 IP Subnet change and concern over impact in AD e

  3. Line Status Concern

  4. MN-700 Log Concern

  5. All I want: why convergence remains a myth

  6. "Wired" router EMF health concern? 5 or 6-port ADSL router?

  7. checkbox remains unchecked..

  8. SSID remains

Loading...