Collecting HOWTOs for a router/AP project

Discussion in 'Home Networking' started by Colin Brough, Mar 19, 2014.

  1. Colin Brough

    Colin Brough Guest

    I'm in the midst of collecting HOWTOs/guides for a project I'm hoping
    to embark on soon, and wondered whether anyone had any suggestions for
    additional reading material!

    The plan is to replace my current Netgear router/wireless AP with a
    homebrew system on something like a Jetway JBC373 from mini-itx.com.
    Aim is to have it serving as router and access point, doing content
    filtering, acting as nameserver and handing out IP addresses.

    Planning to have it hand out static IP addresses to at least a subset
    of the devices that use the network - couple of network printers, a
    wired desktop (Linux), wired backup server (Linux), several laptops
    (mix of Windows and Linux), iPad, iPhone, couple of Android phones...
    Use known MAC addresses to hand out predictable IP addresses.... And
    act as a DHCP server for visiting devices, or the mobile devices from
    the above list that wouldn't really benefit from having a predictable
    IP.

    Likely installing Ubuntu 14.04 LTS when it comes out, and building on
    that.

    Not having done this kind of thing before, would the following
    sequence of steps be about right?

    - install base Linux
    - get the wired ethernet ports (x6, probably) working
    - get it working as a switch (one upstream/WAN port, 5 downstream)
    - nameserver/DHCP stuff in here?
    - then wireless AP stuff?
    - then any filtering software (DansGuardian or similar)

    What would folks preference be for software for each stage (eg which
    nameserver, which DHCP daemon...)?

    And have I missed anything that would be essential, or even useful, on
    such a box.

    Reading so far:

    http://forums.funtoo.org/viewtopic.php?id=892

    http://askubuntu.com/questions/376717/how-to-set-up-a-linux-server-as-a-router

    http://www.enterprisenetworkingplan...Build-A-LinuxBased--Wireless-Access-Point.htm

    http://www.enterprisenetworkingplan...A-LinuxBased-Wireless-Access-Point-Part-2.htm

    http://www.linux.com/learn/tutorials/442417-create-a-secure-linux-based-wireless-access-point

    Cheers

    Colin
     
    Colin Brough, Mar 19, 2014
    #1
    1. Advertisements

  2. Colin Brough

    Rob Morley Guest

    Not much point using a desktop distro for such a basic feature set - if
    I was using that hardware I'd start with a no-gui Debian install, or
    something like Smoothwall, but I'd be more inclined to try running it on
    a Raspberry Pi.
     
    Rob Morley, Mar 19, 2014
    #2
    1. Advertisements

  3. Colin Brough

    Dave Saville Guest


    Why not something that's designed for the job - OpenWRT or similar
    rather than a straight *nix distro? All the
    networking/DNS/DHCP/iptables etc. built in. Just needs configuring.
     
    Dave Saville, Mar 19, 2014
    #3
  4. Colin Brough

    Henry Law Guest

    Other people have suggested various lightweight distros; I couldn't
    comment on that. But at least I'd recommend you install Ubuntu Server
    rather than desktop. If there are desktoppy bits you need you can
    install them separately.
     
    Henry Law, Mar 19, 2014
    #4
  5. Colin Brough

    Colin Brough Guest

    Thanks for the comments - drove me back to looking more fully at
    OpenWRT/DD-WRT. That would certainly be the cheaper option - even if
    8-port kit that are supported are rare to non-existent, a 4-port or
    even 2-port router plus an unmanaged switch would do the job...

    However, one of the prompts for me doing this is providing content
    filtering for the whole house, and I was anticipating dansguardian or
    squidguard or similar. Dansguardian doesn't seem to work on either
    OpenWRT or DD-WRT - eg
    http://www.dd-wrt.com/phpBB2/viewtopic.php?p=625373 or
    http://community.spiceworks.com/topic/294156-open-wrt-dansguardian-and-squid-proxy-on-router
    Partly a software issue (versions of the C++ library), and partly a
    processor power issue - the filtering needs some muscle...

    As for choosing Ubuntu over any other distro - just familiarity, since
    the other Linux boxes I administer are all Ubuntu... Would pare down
    the installation as much as possible.

    Still thinking - does help to try and articulate the questions/sketch
    what I've learned, and get reactions to it. Thanks.

    Cheers

    Colin
     
    Colin Brough, Mar 20, 2014
    #5
  6. <snip>

    Check these out:

    http://www.ipfire.org/
    http://www.ipcop.org/docs.php
    https://www.pfsense.org/
    http://www.endian.com/en/community/overview/#.UzAdLpZ9Cy4
    http://www.devil-linux.org/product/features.php
    http://bsdrp.net/BSDRP
    http://www.zeroshell.org/
    http://sms.it-ccs.com/faq.html
     
    Kirk_Von_Rockstein, Mar 24, 2014
    #6
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.