Client computer on MN-100 does not conecting to the base

Discussion in 'Broadband Hardware' started by Sergiy1987, Feb 13, 2004.

  1. Sergiy1987

    Sergiy1987 Guest

    This topics depends on topic wich is below:
    "MN-100. Client computer cannot conn."

    Thank you for your time reading it...

    I have tried everething. Today in the morning i come up
    with an idea and i reinstalled my Linksys drivers and
    seted up everething from the begining.
    I come up with results as:
    -Linksys drivers are working properly and they receiving
    the Normal amount of packets from each other.
    -After installing the base station:
    a) Host computer installation: "succesfull"
    b) Client computer installation: "unsuccesfull"
    Client computer canno`t connect to the host computer,
    but they see each other on local aeras conections and
    Host computer`s workgroup is conected, but clients
    workgroup is "not", but the local packets are receiving
    in normal.
    I have tried reinstalling my Base station on client, but
    it cannot even finish, becouse it does not detect the
    base station and Internet Connection ( yeterday i had
    mallfunction of both drivers, but today i reinstalled it
    and mallfunction is fixed, but it still canno`t detect
    connection)
    Any sugestions guys? Would be realy appreciate!
     
    Sergiy1987, Feb 13, 2004
    #1
    1. Advertisements

  2. Sergiy1987

    Chris H. Guest

    What is it you're trying to do exactly, and why are you installing Linksys
    drivers with Microsoft's MN-100?
     
    Chris H., Feb 13, 2004
    #2
    1. Advertisements

  3. Sergiy1987

    sergiy1987 Guest

    Because my client computer has only one driver for
    networking and it is a "Linksys".
    So i connecting client computer from "Linksys" to
    my "linksys" driver and it working properly.
    Than i setting up my base station wich recieving
    internet conection from my "Realtek" driver.
    Than i "Bridge" the "-realtek-" with "-linksys-"!!!
    (I`m reaping: "It was working that way for over 6
    months")

    Excuse me! Is there is any other way, to connect them?
    Please share...
     
    sergiy1987, Feb 13, 2004
    #3
  4. Sergiy1987

    Chris H. Guest

    Then you're talking about something else, and Barb is addressing the issues
    in your other thread. You should stick to one thread here.
     
    Chris H., Feb 13, 2004
    #4
  5. Sergiy1987

    sergiy1987 Guest

    What are you tolking about?
    So!? Were should i go now?
     
    sergiy1987, Feb 13, 2004
    #5
  6. Sergiy1987

    Chris H. Guest

    Continue your thread in the MN-100 Client computer canno't connect to the
    Network thread.
     
    Chris H., Feb 13, 2004
    #6
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.