CISCO WIC-1AM ***BRAND NEW*** 1PT analog interface— http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ca

Discussion in 'Network Routers' started by Reubentice, Aug 13, 2004.

  1. Reubentice

    Reubentice Guest

    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=51212&item=5714411219

    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=51212&item=5714411219

    Quick Features:

    a.. Combined with the Cisco 2600 and 3600, the WIC-1AM card
    provides:
    b.. An integrated solution for ease of deployment and management
    c.. Enhanced remote management capabilities
    d.. A cost-effective alternative to leased lines or ISDN
    e.. On-demand dial backup for critical WAN links
    f.. Internal analog modem dialup capability-Internal modems allow
    simple setup of a remote router. There is no separate external power, no
    cables, and everything is in one chassis.
    g.. Support for speeds up to 56K (V.90 specification)-When dialing
    out to a digital endpoint, this feature allows users to achieve maximum data
    transfer rates, equating to faster file transfers, speedier Web access, and
    faster e-mail downloads.
    h.. Cisco IOS Dial Access Software-Cisco IOS Software provides a
    broad range of features for remote router management and dial backup,
    including:
    i.. Reverse Telnet support for LAN-based dial-out and fax-out
    j.. Point-to-Point Protocol (PPP), Multilink PPP (MLPPP), and Serial
    Line Internet Protocol (SLIP)TACACS+, Radius, and PPP password security
    k.. Auto-sensing Internetwork Packet Exchange (IPX), Transmission
    Control Protocol/IP (TCP/IP), AppleTalk Remote Access (ARA), and AppleTalk
    Control Protocol (ATCP)

    Product Overview:

    One- and two-port analog modem WAN Interface Cards (WIC-1AM and
    WIC-2AM) are designed for the award-winning Cisco 2600 and 3600 Series
    modular router platforms. The addition expands the already extensive range
    of WAN Interface Cards currently available for these routers. The interface
    cards provide cost-effective basic telephone service connectivity to allow
    remote router management, asynchronous Dial-on-Demand Routing (DDR) and dial
    backup, dial- and fax-out modem access, and low-density remote access server
    (RAS) services. Combined with the differentiated services delivered through
    Cisco IOS Software, the Cisco 2600 and 3600 Series routers offer customers
    best-of-breed scalability, flexibility, and investment protection, all in
    cost-effective, multifunctional platforms. Both cards feature dual RJ-11
    connectors, which are used for basic telephone service connection. The
    WIC-1AM uses one port for connection to a standard telephone line, and the
    other port can be connected to a basic analog telephone for use when the
    modem is idle.


    Detailed Specifications:


    Device Type Modem (analog)

    Enclosure Type Plug-in module

    Dimensions (WxDxH) 2.7 in x 3.9 in x 0.7 in

    Weight 2.4 oz

    Max Transfer Rate 56 Kbps

    Protocols & Specifications Bell 103, ITU V.21, Bell 212A, ITU
    V.22, ITU V.22bis, ITU V.29, ITU V.32, ITU V.32bis, ITU V.34, ITU V.17, ITU
    V.23, ITU V.27ter, k56Flex, ITU V.34bis, ITU V.33 , Hayes AT command set

    Fax Compatibility G3

    Max Fax Transfer Rate 14.4 Kbps

    Error Correction Protocol MNP-4, ITU V.42, MNP-2, MNP-3

    Data Compression Protocol MNP-5, ITU V.42bis

    System Requirements Cisco IOS


    NEW RETAIL IN BOX!!!



    FREE SHIPPING & HANDLING including insurance— sent USPS Priority Mail!
     
    Reubentice, Aug 13, 2004
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.