Cisco IPSEC VPN to CheckPoint firewall and linux server concern

Discussion in 'Linux Networking' started by qazaka, Oct 9, 2003.

  1. qazaka

    qazaka Guest

    My current network is running like this:

    (Virtual IP running application on 64.62.2.251)Linux Server
    NIC(64.62.2.250)
    --> (64.62.2.249) e0-Cisco with IPsec-e1(64.62.2.241) --->internet
    -->(66.1.2.3)CheckPointFirewall---> 192.168.0.1,192.168.0.2
    (application server)

    And is the 64.62.2.2.241 is my publicIP, 64.2.2.250 is my privateIP
    for this VPN? Or 64.62.2.251 is my privateIP.

    My application will be running on 64.62.2.251,
    all my request will goto 192.168.0.1,192.168.0.2 (application server)
    and the request from 192.168.0.1,192.168.0.2 (application server) goto
    64.62.2.251

    How the VPN going to implement in this network?
    Btw, how should i configure to this Cisco router to test the VPN, more
    details needed.

    If i use 192.168.0.3 to replace 64.62.2.251 as my Private IP, what
    should i need to configure to my Cisco Router so the VPN between Cisco
    -- CheckPoint will working.
    And how about my application which should listen n running on
    64.62.2.251 on Linux server, any conflict with 192.168.0.3 ?

    Thx
    -qaz
     
    qazaka, Oct 9, 2003
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.