Can't get the wireless network to assign a network address

Discussion in 'Wireless Networks' started by W6K, Jun 9, 2008.

  1. W6K

    W6K Guest

    I get the limited or no connectivity message with the reason as above. I have
    good signal, setup looks good and i have been through Ezlan. My other laptop
    connects OK and the setup appears identical. Running XP pro.
     
    W6K, Jun 9, 2008
    #1
    1. Advertisements

  2. W6K

    Lem Guest

    I assume that you are primarily attempting to connect to the router to
    access the Internet.

    First, connect the computer directly to the router using an Ethernet
    cable. If you can browse the Internet now, then disconnect the Ethernet
    cable, *disable* all encryption and filtering options on the router, and
    now try to connect wirelessly and browse the Internet.

    If that works, then re-enable encryption (use WPA2-PSK or WPA-PSK) on
    the router and carefully re-enter the password when you try to connect.

    --
    Lem -- MS-MVP

    To the moon and back with 2K words of RAM and 36K words of ROM.
    http://en.wikipedia.org/wiki/Apollo_Guidance_Computer
    http://history.nasa.gov/afj/compessay.htm
     
    Lem, Jun 9, 2008
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.