Can anyone explain these SNR figures?

Discussion in 'Broadband' started by Nemesis, Apr 4, 2006.

  1. Nemesis

    Nemesis Guest

    Downstream Upstream

    SNR Margin 22.6 31.0 dB
    Line Attenuation 28.9 22.0 dB
    Errored Seconds 0 0
    Loss of Signal 0 0
    Loss of Frame 0 0
    CRC Errors 0 0
    Data Rate 2272 288 kbps
    Latency FAST FAST


    Are these typical or poor?

    Cheers,
     
    Nemesis, Apr 4, 2006
    #1
    1. Advertisements

  2. Nemesis

    poster Guest

    I don't think there ever is a "typical" because the readings will depend
    on the ADSL modem (even two from the same maker might give different!),
    and the conditions on the line at the time.

    All looks fine to me on the readings you have. I have higher Downstream
    margin, lower up, and a higher downstream attenuation, slightly lower up.
    After a period of time, my router (Origo 4-port for these readings) has a
    number of errors reported, but cannot say I've noticed them affecting use:

    Downstream Upstream

    SNR Margin 31.5 26.0 dB
    Line Attenuation 34.8 20.0 dB
    Errored Seconds 31 0
    CRC Errors 43 0
     
    poster, Apr 4, 2006
    #2
    1. Advertisements

  3. Nemesis

    Disorder Guest

    Disorder, Apr 4, 2006
    #3
  4. Nemesis

    Alex Heney Guest

    That depends on your line length.

    There is no such thing as "typical" values.
     
    Alex Heney, Apr 4, 2006
    #4
  5. Nemesis

    Nemesis Guest

    It's *you're a twat*, you cretinous retard.

    HTH
     
    Nemesis, Apr 4, 2006
    #5
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.