Buffalo wbr g54 - Connection Problems

Discussion in 'Broadband' started by Doc, Aug 29, 2004.

  1. Doc

    Doc Guest

    Hi,
    I am using WBR G54 to connect to Internet. The Buffalo Airstation is
    connected to my Desktop PC (Dell - Windows XP home) thru cable and I
    am able to access the Internet using my ISP NTL Broadband (600kbps).
    The problem I have is when I try to access internet using my laptop
    (Sony - Centrino 1.6 - XP Professional) using the Airstation, I am not
    able to access the Internet. The WIRELESS LED on the airstation is not
    glowing.

    Any help is much appreciated.

    Thanks
    Doc
     
    Doc, Aug 29, 2004
    #1
    1. Advertisements

  2. Doc

    Laurie Guest

    Advanced settings : LAN Settings : Wireless.
    Make sure Wireless function is enabled.
     
    Laurie, Aug 29, 2004
    #2
    1. Advertisements

  3. Doc

    Doc Guest

    Thanks Laurie for your reply.My wireless function was enabled,still
    not receiving any signal
     
    Doc, Aug 30, 2004
    #3
  4. Doc

    Darren Grant Guest

    If the wireless light is not illuminated on your Airstation then the
    wireless module has not been loaded.

    This can be caused by.
    1. Wireless being switched off, but you have checked that.
    2. corrupted configuration, update to latest firmware and perform a
    factory reset.
    3. the wireless card has come loose inside the router (or is faulty)
    this will require the router to be sent back for a waranty replacemnt
    from the vendor.
     
    Darren Grant, Aug 31, 2004
    #4
  5. Doc

    Darren Grant Guest

    Oops, sorry about top post.
     
    Darren Grant, Aug 31, 2004
    #5
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.