Adding IP subnets to Soekris/m0n0wall router

Discussion in 'Network Routers' started by Joe Doe, Aug 17, 2004.

  1. Joe Doe

    Joe Doe Guest

    I have a Soekris 4801 (http://soekris.com/, nice piece of hardware) and I am
    using m0n0wall (http://m0n0.ch/wall/, v1.0). At this moment I am using it to
    my personal ADSL line at everything works just fine but now I want to move
    it to my corporate LAN.

    At my office we have an ADSL line with 32 IP addresses and they a split into
    3 subnets (2 x .248 and 1 x .240). The subnets are used as this below scheme
    shows (I hope):

    | INET/ADSL
    |
    | 8xIP (outside LAN)
    [ SOEKRIS/M0N0WALL ]
    | 16xIP (inside LAN)
    | 8xIP (inside LAN)
    |
    | my LAN

    Is it possible (how) to get this eviroment working on the m0n0wall?
     
    Joe Doe, Aug 17, 2004
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. adding wireless router to existing router

  2. Adding Wireless Router to Existing Network/Router ?

  3. Adding a b router to a g router

  4. Soekris Enclosures : OT Plug

  5. Adding a wireless router to an existing network with Cisco router

  6. Adding Modem/Router device to existing network with wireless router?

  7. Cannot Browse from domain populated subnets to remote subnets whichcontain only workgroup servers

  8. Home network (Server+m0n0wall+wireless router)

Loading...