I wish you told us what's the error code when using the net use to map. any
way, post the results of net use and net view \\server name here.
--
For more and other information, go to
http://www.chicagotech.net
Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.
Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.chicagotech.net
This posting is provided "AS IS" with no warranties.
"Cheryl" <(E-Mail Removed)> wrote in message
news:d9d701c3f014$bf4b9680$(E-Mail Removed)...
> No I cannot.
>
>
> >-----Original Message-----
> >can you use net use command to map it?
> >
> >--
> >For more and other information, go to
> http://www.chicagotech.net
> >
> >Don't send e-mail or reply to me except you need
> consulting services.
> >Posting on MS newsgroup will benefit all readers and you
> may get more help.
> >
> >Robert Lin, MS-MVP, MCSE & CNE
> >Networking, Internet, Routing, VPN, Anti-Virus, Tips &
> Troubleshooting on
> >http://www.chicagotech.net
> >This posting is provided "AS IS" with no warranties.
> >
> >"Cheryl" <(E-Mail Removed)> wrote in
> message
> >news:dfff01c3f007$7ca15110$(E-Mail Removed)...
> >> I am running xp workstations. This morning two of the
> >> workstations had lost their connection to our mapped
> >> network drive. I have had the mapping up and running
> for
> >> a while now. Nothing was changed prior to today. I am
> >> unable to reconnect those two workstations. I even
> tried
> >> putting one of the ws in a workgroup and then re-
> entering
> >> the domain, but I am not able to enter the domain now
> >> with error "the local device name is already in use.
> >> This connection has not been restored".
> >
> >
> >.
> >