XP can't print on 98SE server

I have a 98SE computer and an XP pro computer connected with a router
to share my internet connection. Both computers can use the internet.
Both computers can also see each other's shared folders etc. I have a
Samsung ML1250 printer connected to the 98SE box and it will print
properly from there. I have the XP box set up to use the network
printer attached to the 98SE computer. The problem is, the XP box
won't print. When I try to print from the XP computer, the printer
wakes up from it's powered down state, the 'data' light flashes but it
never does print anything. The printer setup us fully available to the
XP computer but nothing I try will get it to print a test page or any
other documant on the network printer attached to the 98SE box.

Does anyone have any thoughts on this? If the printer wasn't visible
to the XP box or something, I might have some ideas. The thing is, all
seems to be correct right up until the paper should feen into the
network printer.

Dave

On 14 Jan 2007 20:26:09 GMT, No One <(E-Mail Removed)> wrote:

>I have a 98SE computer and an XP pro computer connected with a router
>to share my internet connection. Both computers can use the internet.
>Both computers can also see each other's shared folders etc. I have a
>Samsung ML1250 printer connected to the 98SE box and it will print
>properly from there. I have the XP box set up to use the network
>printer attached to the 98SE computer. The problem is, the XP box
>won't print. When I try to print from the XP computer, the printer
>wakes up from it's powered down state, the 'data' light flashes but it
>never does print anything. The printer setup us fully available to the
>XP computer but nothing I try will get it to print a test page or any
>other documant on the network printer attached to the 98SE box.
>
>Does anyone have any thoughts on this? If the printer wasn't visible
>to the XP box or something, I might have some ideas. The thing is, all
>seems to be correct right up until the paper should feen into the
>network printer.
>
>Dave

My guess is that the WinXP drivers aren't installed. Try connecting
the printer directly to the XP machine and printing from there.

-- Zadok
('¿')

Zadok wrote:

> On 14 Jan 2007 20:26:09 GMT, No One <(E-Mail Removed)> wrote:
>
>>I have a 98SE computer and an XP pro computer connected with a
>>router to share my internet connection. Both computers can use
>>the internet. Both computers can also see each other's shared
>>folders etc. I have a Samsung ML1250 printer connected to the
>>98SE box and it will print properly from there. I have the XP box
>>set up to use the network printer attached to the 98SE computer.
>>The problem is, the XP box won't print. When I try to print from
>>the XP computer, the printer wakes up from it's powered down
>>state, the 'data' light flashes but it never does print anything.
>>The printer setup us fully available to the XP computer but
>>nothing I try will get it to print a test page or any other
>>documant on the network printer attached to the 98SE box.
>>
>>Does anyone have any thoughts on this? If the printer wasn't
>>visible to the XP box or something, I might have some ideas. The
>>thing is, all seems to be correct right up until the paper should
>>feen into the network printer.
>>
>>Dave
>
> My guess is that the WinXP drivers aren't installed. Try
> connecting the printer directly to the XP machine and printing
> from there.

I hooked up the printer to the XP box and installed the drivers
again. It prints fine as the local printer.

I thought that it might have been a driver issue as well even though
I had installed XP drivers in the XP box.

I still can't print to the 98SE box when the printer is attached
there. It seems very strange to me that the printer will come out of
it's powered down state, accept data and then just stop when I try to
print from the XP box.

If it did nothing, I would have more to go on ;-)

In article <45aa91e0$0$97223$(E-Mail Removed) ews.net>,
No One <(E-Mail Removed)> wrote:
>I have a 98SE computer and an XP pro computer connected with a router
>to share my internet connection. Both computers can use the internet.
>Both computers can also see each other's shared folders etc. I have a
>Samsung ML1250 printer connected to the 98SE box and it will print
>properly from there. I have the XP box set up to use the network
>printer attached to the 98SE computer. The problem is, the XP box
>won't print. When I try to print from the XP computer, the printer
>wakes up from it's powered down state, the 'data' light flashes but it
>never does print anything. The printer setup us fully available to the
>XP computer but nothing I try will get it to print a test page or any
>other documant on the network printer attached to the 98SE box.
>
>Does anyone have any thoughts on this? If the printer wasn't visible
>to the XP box or something, I might have some ideas. The thing is, all
>seems to be correct right up until the paper should feen into the
>network printer.
>
>Dave

Have you tried un-installing and re-installing the printer on XP Pro?
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm

Steve Winograd [MVP] wrote:

> In article
> <45aa91e0$0$97223$(E-Mail Removed) ews.net>, No One
> <(E-Mail Removed)> wrote:
>>I have a 98SE computer and an XP pro computer connected with a
>>router to share my internet connection. Both computers can use
>>the internet. Both computers can also see each other's shared
>>folders etc. I have a Samsung ML1250 printer connected to the
>>98SE box and it will print properly from there. I have the XP box
>>set up to use the network printer attached to the 98SE computer.
>>The problem is, the XP box won't print. When I try to print from
>>the XP computer, the printer wakes up from it's powered down
>>state, the 'data' light flashes but it never does print anything.
>>The printer setup us fully available to the XP computer but
>>nothing I try will get it to print a test page or any other
>>documant on the network printer attached to the 98SE box.
>>
>>Does anyone have any thoughts on this? If the printer wasn't
>>visible to the XP box or something, I might have some ideas. The
>>thing is, all seems to be correct right up until the paper should
>>feen into the network printer.
>>
>>Dave
>
> Have you tried un-installing and re-installing the printer on XP
> Pro?


Yes I tried that. As a matter of fact, when I first started trying
to network these computers, there was NO printer at all on the XP box
as I never had a need to print from it.

I have discovered something else strange. If I am on the XP box and
I select the networked 98SE printer and have it print to file, a file
is created. The strange thing is that when I take that '.prn' file
to the 98SE computer and try to print it, the same behavious happens.
The printer wakes up and recieves some data and then stops without
finishing the print job.

I have also installed the same printer as a local printer on the XP
box. If I 'print to file' using that printer instead of the
networked one, the '.prn' file will print correctly when taken to the
98SE box.

I have no clue what to try next. The good thing is that I can get
'print to file' to work properly. At least I can print something I
have on the XP box. Not as slick as a direct print, but I might have
to live with it.

No One wrote:

> Steve Winograd [MVP] wrote:
>
>> In article
>> <45aa91e0$0$97223$(E-Mail Removed) ews.net>, No
>> One <(E-Mail Removed)> wrote:
>>>I have a 98SE computer and an XP pro computer connected with a
>>>router to share my internet connection. Both computers can use
>>>the internet. Both computers can also see each other's shared
>>>folders etc. I have a Samsung ML1250 printer connected to the
>>>98SE box and it will print properly from there. I have the XP
>>>box set up to use the network printer attached to the 98SE
>>>computer. The problem is, the XP box won't print. When I try to
>>>print from the XP computer, the printer wakes up from it's
>>>powered down state, the 'data' light flashes but it never does
>>>print anything. The printer setup us fully available to the XP
>>>computer but nothing I try will get it to print a test page or
>>>any other documant on the network printer attached to the 98SE
>>>box.
>>>
>>>Does anyone have any thoughts on this? If the printer wasn't
>>>visible to the XP box or something, I might have some ideas. The
>>>thing is, all seems to be correct right up until the paper should
>>>feen into the network printer.
>>>
>>>Dave
>>
>> Have you tried un-installing and re-installing the printer on XP
>> Pro?
>
>
> Yes I tried that. As a matter of fact, when I first started
> trying to network these computers, there was NO printer at all on
> the XP box as I never had a need to print from it.
>
> I have discovered something else strange. If I am on the XP box
> and I select the networked 98SE printer and have it print to file,
> a file is created. The strange thing is that when I take that
> '.prn' file to the 98SE computer and try to print it, the same
> behavious happens. The printer wakes up and recieves some data
> and then stops without finishing the print job.
>
> I have also installed the same printer as a local printer on the
> XP box. If I 'print to file' using that printer instead of the
> networked one, the '.prn' file will print correctly when taken to
> the 98SE box.
>
> I have no clue what to try next. The good thing is that I can get
> 'print to file' to work properly. At least I can print something
> I have on the XP box. Not as slick as a direct print, but I might
> have to live with it.
>

I was thinking it must be some sort of driver issue as everything
else worked. I uninstalled all the printers from both computers and
started from scratch. I reinstalled the printers againon both
computers. The XP box can now print on the printer attached to the
98SE box.

Thank you to Zadok and Steve W for steering be in the right
direction.

In article <45aaea3d$0$97247$(E-Mail Removed) ews.net>,
No One <(E-Mail Removed)> wrote:
>No One wrote:
>
>> Steve Winograd [MVP] wrote:
>>
>>> In article
>>> <45aa91e0$0$97223$(E-Mail Removed) ews.net>, No
>>> One <(E-Mail Removed)> wrote:
>>>>I have a 98SE computer and an XP pro computer connected with a
>>>>router to share my internet connection. Both computers can use
>>>>the internet. Both computers can also see each other's shared
>>>>folders etc. I have a Samsung ML1250 printer connected to the
>>>>98SE box and it will print properly from there. I have the XP
>>>>box set up to use the network printer attached to the 98SE
>>>>computer. The problem is, the XP box won't print. When I try to
>>>>print from the XP computer, the printer wakes up from it's
>>>>powered down state, the 'data' light flashes but it never does
>>>>print anything. The printer setup us fully available to the XP
>>>>computer but nothing I try will get it to print a test page or
>>>>any other documant on the network printer attached to the 98SE
>>>>box.
>>>>
>>>>Does anyone have any thoughts on this? If the printer wasn't
>>>>visible to the XP box or something, I might have some ideas. The
>>>>thing is, all seems to be correct right up until the paper should
>>>>feen into the network printer.
>>>>
>>>>Dave
>>>
>>> Have you tried un-installing and re-installing the printer on XP
>>> Pro?
>>
>>
>> Yes I tried that. As a matter of fact, when I first started
>> trying to network these computers, there was NO printer at all on
>> the XP box as I never had a need to print from it.
>>
>> I have discovered something else strange. If I am on the XP box
>> and I select the networked 98SE printer and have it print to file,
>> a file is created. The strange thing is that when I take that
>> '.prn' file to the 98SE computer and try to print it, the same
>> behavious happens. The printer wakes up and recieves some data
>> and then stops without finishing the print job.
>>
>> I have also installed the same printer as a local printer on the
>> XP box. If I 'print to file' using that printer instead of the
>> networked one, the '.prn' file will print correctly when taken to
>> the 98SE box.
>>
>> I have no clue what to try next. The good thing is that I can get
>> 'print to file' to work properly. At least I can print something
>> I have on the XP box. Not as slick as a direct print, but I might
>> have to live with it.
>>
>
>I was thinking it must be some sort of driver issue as everything
>else worked. I uninstalled all the printers from both computers and
>started from scratch. I reinstalled the printers againon both
>computers. The XP box can now print on the printer attached to the
>98SE box.
>
>Thank you to Zadok and Steve W for steering be in the right
>direction.

You're welcome. Thanks for letting us know the solution.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm