XP and 2000 workgroup can't see the Win98 pc

I've forgotten much of win98 networking steps.. is it necessary to manually
bind tcp/ip to the adapter?

The protocol is automatically bound to the card and the service.

"mgm" <(E-Mail Removed)> wrote in message
news:u#(E-Mail Removed)...
> I've forgotten much of win98 networking steps.. is it necessary to
manually
> bind tcp/ip to the adapter?
>
>

Still no luck. The workgroup called WORKGROUP that has an XPpro pc and a
Win2kServer pc can't see the win98 pc. Also, this win98 1st edition (no
updates until I can access network) pc can't ping the router. It does a
successful ping of the loopback add. so I'm assuming tcp/ip is installed
correctly. All hardware, nic, utp cables are fine. This pc has a second
partition for yet another win2k server os and all hardware functions
perfectly and this os is recognized in the "WORKGROUP".
"Rob Elder MVP-Networking" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> The protocol is automatically bound to the card and the service.
>
> "mgm" <(E-Mail Removed)> wrote in message
> news:u#(E-Mail Removed)...
> > I've forgotten much of win98 networking steps.. is it necessary to
> manually
> > bind tcp/ip to the adapter?
> >
> >
>
>

Are you getting a valid IP address on that 98 PC?

"mgm" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Still no luck. The workgroup called WORKGROUP that has an XPpro pc and a
> Win2kServer pc can't see the win98 pc. Also, this win98 1st edition (no
> updates until I can access network) pc can't ping the router. It does a
> successful ping of the loopback add. so I'm assuming tcp/ip is installed
> correctly. All hardware, nic, utp cables are fine. This pc has a second
> partition for yet another win2k server os and all hardware functions
> perfectly and this os is recognized in the "WORKGROUP".
> "Rob Elder MVP-Networking" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > The protocol is automatically bound to the card and the service.
> >
> > "mgm" <(E-Mail Removed)> wrote in message
> > news:u#(E-Mail Removed)...
> > > I've forgotten much of win98 networking steps.. is it necessary to
> > manually
> > > bind tcp/ip to the adapter?
> > >
> > >
> >
> >
>
>

no
"Rob Elder MVP-Networking" <(E-Mail Removed)> wrote in message
news:uWPjZ%(E-Mail Removed)...
> Are you getting a valid IP address on that 98 PC?
>
> "mgm" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > Still no luck. The workgroup called WORKGROUP that has an XPpro pc and a
> > Win2kServer pc can't see the win98 pc. Also, this win98 1st edition (no
> > updates until I can access network) pc can't ping the router. It does a
> > successful ping of the loopback add. so I'm assuming tcp/ip is installed
> > correctly. All hardware, nic, utp cables are fine. This pc has a second
> > partition for yet another win2k server os and all hardware functions
> > perfectly and this os is recognized in the "WORKGROUP".
> > "Rob Elder MVP-Networking" <(E-Mail Removed)> wrote in message
> > news:(E-Mail Removed)...
> > > The protocol is automatically bound to the card and the service.
> > >
> > > "mgm" <(E-Mail Removed)> wrote in message
> > > news:u#(E-Mail Removed)...
> > > > I've forgotten much of win98 networking steps.. is it necessary to
> > > manually
> > > > bind tcp/ip to the adapter?
> > > >
> > > >
> > >
> > >
> >
> >
>
>