Thanks.
I finally got it working with the win95 driver set that I had.
The fix was to set FULL DUPLEX to ALLOW (DISALLOW is the default) in the
win98 network setup.
Odd thing that, since it was also set to auto-detect and it runs at
half-duplex.
K
"Gerry Voras" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> The driver is very common and easy to find. Look here:
>
http://downloadfinder.intel.com/scri...&ProductID=740
>
>
> "Kostac" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > x-no-archive: yes
> > xircom cem28 network interface card
> >
> > Hi. I upgraded an old laptop's O/S from Win95 to Win98.
> > The xircom ccem28 network interface card quit working properly.
> >
> > I tried all maner of driver uninstalls and updates to no avail.
> > xircom and elsewhere do not appear to have drivers to support this thing
> on
> > win98.
> > Might someone out there discovered a work-around, a compatible driver
set
> > for this thing?
> >
> > A new wireless network adapter works just fine, by the way.
> >
> > ipconfig reports the an assigned static IP ok - 192.168.0.x but it can
> only
> > ping itself and none of the other local network hosts, etc.
> >
> > Thanks
> > --
> > k
> >
> >
>
>