WRT54GS is not reachable after a reboot

Hi all,

Some days ago I bought the WRT54GS linksys wlan router. I installed openwrt
on this box. But after every reboot I am not able to login. I changed
nothing in the configration after the installation. I only put the image via
tftp on the router then I was able to login. A complete reset (10 or 15
seconds or so...) on this box is necessary to login again. Is that a normal
behauvior or a problem in the software or perhaps in the hardware.

# nvram show | grep boot
bootnv_ver=2
boot_wait=on
size: 17131 bytes (15637 left)
boot_ver=v3.4

Any Suggestions about this?!

Thanks in advance,
Stefan

>>>>> "Stefan" == Stefan Zinn <(E-Mail Removed)> writes:

Stefan> Hi all, Some days ago I bought the WRT54GS linksys wlan
Stefan> router. I installed openwrt on this box. But after every
Stefan> reboot I am not able to login. I changed nothing in the
Stefan> configration after the installation. I only put the image via
Stefan> tftp on the router then I was able to login. A complete reset
Stefan> (10 or 15 seconds or so...) on this box is necessary to login
Stefan> again. Is that a normal behauvior or a problem in the
Stefan> software or perhaps in the hardware.

Stefan> # nvram show | grep boot bootnv_ver=2 boot_wait=on size:
Stefan> 17131 bytes (15637 left) boot_ver=v3.4

Stefan> Any Suggestions about this?!

Stefan> Thanks in advance, Stefan


http://openwrt.org/OpenWrtFaq#head-a...b5d92b02b86406

http://openwrt.org/OpenWrtDocs/Using

Try using the rescue procedure with first boot to see what is going
on. The same thing happened to me, and I had to use firstboot to
rescue the system.

Exactly what is the problem I don't have a clue.

Later,

Alan