WRT54G router

Is there any where to find which Client Host is attached to my wrt54g.
I'm trying to find which PC at attach to the etheret port on the back of
the wrt54g.


Thanx

Hanz

"Hanz Schmidt" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed). ..
> Is there any where to find which Client Host is attached to my wrt54g.
> I'm trying to find which PC at attach to the etheret port on the back of
> the wrt54g.
>
>
> Thanx
>
> Hanz
>
Go into the router setup page and click on "Status" menu, then "Local
Network" sub menu and click on the "DHCP clients table" button.

sorry - that doen't tell me which PC is attach to which ethernet 1,2,3,4.

Hanz


xyz wrote:
> "Hanz Schmidt" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed). ..
>
>>Is there any where to find which Client Host is attached to my wrt54g.
>>I'm trying to find which PC at attach to the etheret port on the back of
>>the wrt54g.
>>
>>
>>Thanx
>>
>>Hanz
>>
>
> Go into the router setup page and click on "Status" menu, then "Local
> Network" sub menu and click on the "DHCP clients table" button.
>
>

"Hanz Schmidt" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed). ..
> sorry - that doen't tell me which PC is attach to which ethernet 1,2,3,4.
>
> Hanz
>
>
> xyz wrote:
>> "Hanz Schmidt" <(E-Mail Removed)> wrote in message
>> news:(E-Mail Removed). ..
>>
>>>Is there any where to find which Client Host is attached to my wrt54g.
>>>I'm trying to find which PC at attach to the etheret port on the back of
>>>the wrt54g.
>>>
>>>
>>>Thanx
>>>
>>>Hanz
>>>
>>
>> Go into the router setup page and click on "Status" menu, then "Local
>> Network" sub menu and click on the "DHCP clients table" button.
>>
>>
>
Then unplug one cable at a time.

But the router knows......

LOL

Hanz


xyz wrote:
> "Hanz Schmidt" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed). ..
>
>>sorry - that doen't tell me which PC is attach to which ethernet 1,2,3,4.
>>
>>Hanz
>>
>>
>>xyz wrote:
>>
>>>"Hanz Schmidt" <(E-Mail Removed)> wrote in message
>>>news:(E-Mail Removed) et...
>>>
>>>
>>>>Is there any where to find which Client Host is attached to my wrt54g.
>>>>I'm trying to find which PC at attach to the etheret port on the back of
>>>>the wrt54g.
>>>>
>>>>
>>>>Thanx
>>>>
>>>>Hanz
>>>>
>>>
>>>Go into the router setup page and click on "Status" menu, then "Local
>>>Network" sub menu and click on the "DHCP clients table" button.
>>>
>>>
>>
> Then unplug one cable at a time.
>
>

"Hanz Schmidt" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed). ..
> But the router knows......
>
> LOL
>
> Hanz
>
>
> xyz wrote:
>> "Hanz Schmidt" <(E-Mail Removed)> wrote in message
>> news:(E-Mail Removed). ..
>>
>>>sorry - that doen't tell me which PC is attach to which ethernet 1,2,3,4.
>>>
>>>Hanz
>>>
>>>
>>>xyz wrote:
>>>
>>>>"Hanz Schmidt" <(E-Mail Removed)> wrote in message
>>>>news:05mdncp8yacitivbnZ2dnUVZ_i2dnZ2d@neonova. net...
>>>>
>>>>
>>>>>Is there any where to find which Client Host is attached to my wrt54g.
>>>>>I'm trying to find which PC at attach to the etheret port on the back
>>>>>of the wrt54g.
>>>>>
>>>>>
>>>>>Thanx
>>>>>
>>>>>Hanz
>>>>>
>>>>
>>>>Go into the router setup page and click on "Status" menu, then "Local
>>>>Network" sub menu and click on the "DHCP clients table" button.
>>>>
>>>>
>>>
>> Then unplug one cable at a time.

Or follow each cable ....


--
Enlevez le pi pour me répondre par mail.

"Hanz Schmidt" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed). ..
> But the router knows......
>
> LOL

True enough. But the firmware installed in the router is very limited on the
management side of the house. But then in most cases it only costs $50.
So you can either cable trace the connections, unplug them to see which one
gets disconnected,etc.
I am not sure if the 3rd party firmware will do what you are looking for.

>
> Hanz
>
>
> xyz wrote:
>> "Hanz Schmidt" <(E-Mail Removed)> wrote in message
>> news:(E-Mail Removed). ..
>>
>>>sorry - that doen't tell me which PC is attach to which ethernet 1,2,3,4.
>>>
>>>Hanz
>>>
>>>
>>>xyz wrote:
>>>
>>>>"Hanz Schmidt" <(E-Mail Removed)> wrote in message
>>>>news:05mdncp8yacitivbnZ2dnUVZ_i2dnZ2d@neonova. net...
>>>>
>>>>
>>>>>Is there any where to find which Client Host is attached to my wrt54g.
>>>>>I'm trying to find which PC at attach to the etheret port on the back
>>>>>of the wrt54g.
>>>>>
>>>>>
>>>>>Thanx
>>>>>
>>>>>Hanz
>>>>>
>>>>
>>>>Go into the router setup page and click on "Status" menu, then "Local
>>>>Network" sub menu and click on the "DHCP clients table" button.
>>>>
>>>>
>>>
>> Then unplug one cable at a time.
>

"Dana" <(E-Mail Removed)> skrev i en meddelelse
news:391f4$46b72d6f$944e306e$(E-Mail Removed)...
>
> "Hanz Schmidt" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed). ..
>> But the router knows......
>>
>> LOL
>
snip
>>>>>Go into the router setup page and click on "Status" menu, then "Local
>>>>>Network" sub menu and click on the "DHCP clients table" button.
>>>>>
>>>>>
>>>>
>>> Then unplug one cable at a time.
>>
>
>

Go to "Setup" - "Basic Setup" and change "Client Lease Time" from "0" to "1"
This way the router forgets the client IP in 1 minute and I suppose you can
do the unplug/plug test.
Remenber to refresh the "DHCP clients table"

Set the "Client Lease Time" back to 0 when finished.

Niels