WRT54G and pptp cannot run server

When I'm trying to run any server behind my WRT54G it simply doesn't work.
My configuration type is PPTP, because of my dutch DSL provider.
I know that other configurationtypes do work, so I'm asking only people who
have a PPTP conf type!
Even putting my computer into the dmz doesn't work.
I've upgraded the firmware to the latest version 1.30.7
When i'm using Upnp I can forward a port, eg. port 80 but then I'm not able
to browse the internet from inside.
When I do try to access the internet, it always point to my own webserver,
it's kind of funny to go to www.google.com and ending up at your own website
:-(
Please don't come up with any answers that I have to do portforwarding or
putting my server with an fixed Ip into the DMZ, i've tried all these kind
of settings.

So someone any good suggestions?
Or better someone got this working (e.g. with adsl from KPN) and is willing
to provide me the details?
Thanks
John

Werkt prima alleen port forwarding werkt niet.
Heb je de dns ingestelt bij de dns.?
"John" <(E-Mail Removed)> wrote in message
news:3f2843a2$0$49104$(E-Mail Removed)...
> When I'm trying to run any server behind my WRT54G it simply doesn't work.
> My configuration type is PPTP, because of my dutch DSL provider.
> I know that other configurationtypes do work, so I'm asking only people
who
> have a PPTP conf type!
> Even putting my computer into the dmz doesn't work.
> I've upgraded the firmware to the latest version 1.30.7
> When i'm using Upnp I can forward a port, eg. port 80 but then I'm not
able
> to browse the internet from inside.
> When I do try to access the internet, it always point to my own webserver,
> it's kind of funny to go to www.google.com and ending up at your own
website
> :-(
> Please don't come up with any answers that I have to do portforwarding or
> putting my server with an fixed Ip into the DMZ, i've tried all these kind
> of settings.
>
> So someone any good suggestions?
> Or better someone got this working (e.g. with adsl from KPN) and is
willing
> to provide me the details?
> Thanks
> John
>
>

De wrt54g is nog niet optimaal volgens mij. Ik gebruik emule en krijg alleen
maar een lowid. Heb een BEFW11S4 weer in gebruik genomen port forwarding en
triggering aangezet en heb daardoor high id. Zoalng die wrt54g nog niet goed
is gebruik ik hem niet. Die opties die jij nodig hebt werken absoluut niet
met deze wap router. Heb gedult of ruil hem in voor een BEFW11S4.


groetjes Dick Hofman
"John" <(E-Mail Removed)> wrote in message
news:3f2843a2$0$49104$(E-Mail Removed)...
> When I'm trying to run any server behind my WRT54G it simply doesn't work.
> My configuration type is PPTP, because of my dutch DSL provider.
> I know that other configurationtypes do work, so I'm asking only people
who
> have a PPTP conf type!
> Even putting my computer into the dmz doesn't work.
> I've upgraded the firmware to the latest version 1.30.7
> When i'm using Upnp I can forward a port, eg. port 80 but then I'm not
able
> to browse the internet from inside.
> When I do try to access the internet, it always point to my own webserver,
> it's kind of funny to go to www.google.com and ending up at your own
website
> :-(
> Please don't come up with any answers that I have to do portforwarding or
> putting my server with an fixed Ip into the DMZ, i've tried all these kind
> of settings.
>
> So someone any good suggestions?
> Or better someone got this working (e.g. with adsl from KPN) and is
willing
> to provide me the details?
> Thanks
> John
>
>

Heb jij wel een server achter de WRT54G lopen dan?


"d.w. h" <(E-Mail Removed)> wrote in message
news:bgeamn$kgo$(E-Mail Removed)...
> Werkt prima alleen port forwarding werkt niet.
> Heb je de dns ingestelt bij de dns.?
> "John" <(E-Mail Removed)> wrote in message
> news:3f2843a2$0$49104$(E-Mail Removed)...
> > When I'm trying to run any server behind my WRT54G it simply doesn't
work.
> > My configuration type is PPTP, because of my dutch DSL provider.
> > I know that other configurationtypes do work, so I'm asking only people
> who
> > have a PPTP conf type!
> > Even putting my computer into the dmz doesn't work.
> > I've upgraded the firmware to the latest version 1.30.7
> > When i'm using Upnp I can forward a port, eg. port 80 but then I'm not
> able
> > to browse the internet from inside.
> > When I do try to access the internet, it always point to my own
webserver,
> > it's kind of funny to go to www.google.com and ending up at your own
> website
> > :-(
> > Please don't come up with any answers that I have to do portforwarding
or
> > putting my server with an fixed Ip into the DMZ, i've tried all these
kind
> > of settings.
> >
> > So someone any good suggestions?
> > Or better someone got this working (e.g. with adsl from KPN) and is
> willing
> > to provide me the details?
> > Thanks
> > John
> >
> >
>
>

nee port forwarding wordt nog niet door deze accesspoint ondersteunt als je
bij http://www.broadbandreports.com/forum kan je lezen hoeveel mensen er
problemen met deze routers hebben.
Ik heb nu een Linksys BEFW11S4 die ondersteunt wel goed port forwarding. De
support van linksys vind ik niet erg goed. Er wordt al maanden gesproken dat
hij port forwarding in in nieuwere firmware zal ondersteunen.
Zodoende heb ik maar even die Linksys BEFW11S4 neergezet. Ik gebruik toch
geen 54 mb. Jou is het zeker ook niet gelukt om pf aan de praat te krijgen.


met vr groet dick
"John" <(E-Mail Removed)> wrote in message
news:3f2afaad$0$49102$(E-Mail Removed)...
> Heb jij wel een server achter de WRT54G lopen dan?
>
>
> "d.w. h" <(E-Mail Removed)> wrote in message
> news:bgeamn$kgo$(E-Mail Removed)...
> > Werkt prima alleen port forwarding werkt niet.
> > Heb je de dns ingestelt bij de dns.?
> > "John" <(E-Mail Removed)> wrote in message
> > news:3f2843a2$0$49104$(E-Mail Removed)...
> > > When I'm trying to run any server behind my WRT54G it simply doesn't
> work.
> > > My configuration type is PPTP, because of my dutch DSL provider.
> > > I know that other configurationtypes do work, so I'm asking only
people
> > who
> > > have a PPTP conf type!
> > > Even putting my computer into the dmz doesn't work.
> > > I've upgraded the firmware to the latest version 1.30.7
> > > When i'm using Upnp I can forward a port, eg. port 80 but then I'm not
> > able
> > > to browse the internet from inside.
> > > When I do try to access the internet, it always point to my own
> webserver,
> > > it's kind of funny to go to www.google.com and ending up at your own
> > website
> > > :-(
> > > Please don't come up with any answers that I have to do portforwarding
> or
> > > putting my server with an fixed Ip into the DMZ, i've tried all these
> kind
> > > of settings.
> > >
> > > So someone any good suggestions?
> > > Or better someone got this working (e.g. with adsl from KPN) and is
> > willing
> > > to provide me the details?
> > > Thanks
> > > John
> > >
> > >
> >
> >
>
>

"John" <(E-Mail Removed)> schreef in bericht
news:3f2843a2$0$49104$(E-Mail Removed)...
> When I'm trying to run any server behind my WRT54G it simply doesn't work.
> My configuration type is PPTP, because of my dutch DSL provider.
> I know that other configurationtypes do work, so I'm asking only people
who
> have a PPTP conf type!
> Even putting my computer into the dmz doesn't work.
> I've upgraded the firmware to the latest version 1.30.7
> When i'm using Upnp I can forward a port, eg. port 80 but then I'm not
able
> to browse the internet from inside.
> When I do try to access the internet, it always point to my own webserver,
> it's kind of funny to go to www.google.com and ending up at your own
website
> :-(
> Please don't come up with any answers that I have to do portforwarding or
> putting my server with an fixed Ip into the DMZ, i've tried all these kind
> of settings.
>
> So someone any good suggestions?
> Or better someone got this working (e.g. with adsl from KPN) and is
willing
> to provide me the details?
> Thanks
> John
>
>

same problem here..

LINKSYS WRTG54 HAS A PROBLEM WITH OPENING PORTS