Networking Forums
Home Register Members Search Links
Member Login:

Networking Forums > Wireless Networking > Wireless Internet > WRT54g and multicast stream

Reply
Thread Tools Display Modes

WRT54g and multicast stream

 
 
Nico
Guest
Posts: n/a

 
      11-07-2004, 12:59 AM
Please help me!I've got a wrt54g with wifibox firmware, when the router is
reached by a multicast stream (from outside) it doesn't forward it to che
pcs connected to it... how do I leave the UDP multicast reach the pcs
connected to the router?here is my configuration:
# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 br0
137.8.32.0 * 255.255.255.0 U 0 0 0
vlan1
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default 5.8.32.1 0.0.0.0 UG 0 0 0
vlan1

# ifconfig
br0 Link encap:Ethernet HWaddr 00:0F:66:XX:XX:01
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4209 errors:0 dropped:0 overruns:0 frame:0
TX packets:4130 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:354443 (346.1 KiB) TX bytes:2118141 (2.0 MiB)

eth0 Link encap:Ethernet HWaddr 00:0F:66:XX:XX:01
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:759050 errors:0 dropped:0 overruns:0 frame:0
TX packets:2564 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:1034151201 (986.2 MiB) TX bytes:264139 (257.9 KiB)
Interrupt:5 Base address:0x2000

eth1 Link encap:Ethernet HWaddr 00:0F:66:XX:XX:03
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4207 errors:0 dropped:0 overruns:0 frame:2
TX packets:5534 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:413329 (403.6 KiB) TX bytes:2248305 (2.1 MiB)
Interrupt:4 Base address:0x1000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MULTICAST MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

vlan0 Link encap:Ethernet HWaddr 00:0F:66:XX:XX:01
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:1416 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:104764 (102.3 KiB)

vlan1 Link encap:Ethernet HWaddr 00:XX:XX:510:02
inet addr:137.8.32.58 Bcast:137.8.32.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:759051 errors:0 dropped:0 overruns:0 frame:0
TX packets:1148 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1020489649 (973.2 MiB) TX bytes:159375 (155.6 KiB)


# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT all -- anywhere anywhere state
RELATED,ESTABLISHED
ACCEPT all -- anywhere anywhere state NEW
ACCEPT all -- anywhere anywhere state NEW
DROP tcp -- anywhere anywhere tcp dpt:telnet
DROP icmp -- anywhere anywhere

Chain FORWARD (policy ACCEPT)
target prot opt source destination
ACCEPT all -- anywhere anywhere
DROP tcp -- anywhere anywhere tcp dpt:1723
DROP udp -- anywhere anywhere udp dpt:l2tp
DROP udp -- anywhere anywhere udp dpt:isakmp
lan2wan all -- anywhere anywhere
ACCEPT udp -- anywhere 192.168.1.103 udp dpt:11111
ACCEPT all -- anywhere anywhere state
RELATED,ESTABLISHED
ACCEPT all -- anywhere anywhere state NEW
 
Reply With Quote
 
 
 
 
Nico
Guest
Posts: n/a

 
      11-07-2004, 01:00 AM
there's one error,the default route is 137.8.32.1,not 5.8.32.1
"Nico" <(E-Mail Removed)> wrote in message
news:Vjfjd.2097$(E-Mail Removed)...
> Please help me!I've got a wrt54g with wifibox firmware, when the router is
> reached by a multicast stream (from outside) it doesn't forward it to che
> pcs connected to it... how do I leave the UDP multicast reach the pcs
> connected to the router?here is my configuration:
> # route
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use
> Iface
> 192.168.1.0 * 255.255.255.0 U 0 0 0
> br0
> 137.8.32.0 * 255.255.255.0 U 0 0 0
> vlan1
> 127.0.0.0 * 255.0.0.0 U 0 0 0 lo
> default 5.8.32.1 0.0.0.0 UG 0 0 0
> vlan1
>
> # ifconfig
> br0 Link encap:Ethernet HWaddr 00:0F:66:XX:XX:01
> inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:4209 errors:0 dropped:0 overruns:0 frame:0
> TX packets:4130 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:354443 (346.1 KiB) TX bytes:2118141 (2.0 MiB)
>
> eth0 Link encap:Ethernet HWaddr 00:0F:66:XX:XX:01
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:759050 errors:0 dropped:0 overruns:0 frame:0
> TX packets:2564 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:1034151201 (986.2 MiB) TX bytes:264139 (257.9 KiB)
> Interrupt:5 Base address:0x2000
>
> eth1 Link encap:Ethernet HWaddr 00:0F:66:XX:XX:03
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:4207 errors:0 dropped:0 overruns:0 frame:2
> TX packets:5534 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:413329 (403.6 KiB) TX bytes:2248305 (2.1 MiB)
> Interrupt:4 Base address:0x1000
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MULTICAST MTU:16436 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> vlan0 Link encap:Ethernet HWaddr 00:0F:66:XX:XX:01
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1416 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 B) TX bytes:104764 (102.3 KiB)
>
> vlan1 Link encap:Ethernet HWaddr 00:XX:XX:510:02
> inet addr:137.8.32.58 Bcast:137.8.32.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:759051 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1148 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:1020489649 (973.2 MiB) TX bytes:159375 (155.6 KiB)
>
>
> # iptables -L
> Chain INPUT (policy ACCEPT)
> target prot opt source destination
> ACCEPT all -- anywhere anywhere state
> RELATED,ESTABLISHED
> ACCEPT all -- anywhere anywhere state NEW
> ACCEPT all -- anywhere anywhere state NEW
> DROP tcp -- anywhere anywhere tcp
> dpt:telnet
> DROP icmp -- anywhere anywhere
>
> Chain FORWARD (policy ACCEPT)
> target prot opt source destination
> ACCEPT all -- anywhere anywhere
> DROP tcp -- anywhere anywhere tcp dpt:1723
> DROP udp -- anywhere anywhere udp dpt:l2tp
> DROP udp -- anywhere anywhere udp
> dpt:isakmp
> lan2wan all -- anywhere anywhere
> ACCEPT udp -- anywhere 192.168.1.103 udp dpt:11111
> ACCEPT all -- anywhere anywhere state
> RELATED,ESTABLISHED
> ACCEPT all -- anywhere anywhere state NEW
>
 
Reply With Quote
Reply

« Wireless USB port? | 802.11x pioritize packets, free wi-fi »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Can Microsoft's RRAS be configured for multicast? Such as in cases where you want to make it a multicast rendevous point? Spin Windows Networking 0 10-26-2006 01:06 PM
Data Stream to IP Stream John Edgar Broadband 2 04-30-2005 09:11 AM
Virgin ADSL - IP Stream or Data Stream ??? DeeBee Broadband 19 03-06-2005 11:28 AM
Datastream vs IP Stream Free@freebies4me.fsnet.co.uk Broadband 2 02-12-2004 09:06 AM
IP Stream vs DataStream me@privacy.net Broadband 13 01-06-2004 10:00 AM


Forum Software Powered by vBulletin®, Copyright Jelsoft Enterprises Ltd.
SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.
Contact Us - Archive - Privacy Statement - Top

1 2 3 4 5 6 7 8 9 10 11