WPA in client-mode on Sveasoft Alchemy

I can't get client-mode WPA to work on alchemy firmware.
(WEP however works fine)

Does anyone have a working setup with WPA in client-mode?

I am having a similar problem with Sartori 4.0.

Dave G

"Roger ?str?m" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) om...
>I can't get client-mode WPA to work on alchemy firmware.
> (WEP however works fine)
>
> Does anyone have a working setup with WPA in client-mode?

> I am having a similar problem with Sartori 4.0.
>
> Dave G

Yes, same thing with Satori too.
Is is even implemented or not?
Maybe it's on the todo list..

I went down to a 8-digit WPA key and my wireless is now working okay. What
gives with that?

Dave G

"Roger ?str?m" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) om...
>> I am having a similar problem with Sartori 4.0.
>>
>> Dave G
>
> Yes, same thing with Satori too.
> Is is even implemented or not?
> Maybe it's on the todo list..

> I went down to a 8-digit WPA key and my wireless is now working okay. What
> gives with that?
>
> Dave G

No difference for me. 8 character-keys are all that I've tried since
it's the minimum.

The WLAN-led shows acticity and under Status-->Wireless, the AP Signal
disappears every 4-5 seconds but then returns right back again.

It may be the AP (Netgear WGT624) that's having the problems with WPA.

On Thu, 17 Mar 2005 00:25:50 -0700, Roger ?str?m wrote
(in article <(E-Mail Removed)>) :

> I can't get client-mode WPA to work on alchemy firmware.
> (WEP however works fine)
>
> Does anyone have a working setup with WPA in client-mode?

Don't know if this will help, but this guy got it working and wrote a How To:

<http://forums.anandtech.com/messagev...1513386&entert
hread=y>

--
Please, no "Go Google this" replies. I wouldn't
ask a question here if I hadn't done that already.

DaveC
(E-Mail Removed)
This is an invalid return address
Please reply in the news group