Wiring solid UTP cable to terminals?

Having established that running a CAT6 cable from my attic room to the
lounge will be OK, I now have a totally newbie question about wiring:

I've got some CAT6 terminal sockets for the walls and would like to run
the cable into the bedroom, break it, then run the rest to the ground
floor. Do I just wire each end up and plug in hub? Or is it more
complicated?

Also - the terminals in the wall sockets are colour-coded, but it
doesn't seem to be simply a matter of wiring each filament to the
relevant colour - there are terminals labelled A and B and stuff.

Does anyone know of any diagrams I can look at?

Jonathan wrote:
> Having established that running a CAT6 cable from my attic room to the
> lounge will be OK, I now have a totally newbie question about wiring:
>
> I've got some CAT6 terminal sockets for the walls and would like to run
> the cable into the bedroom, break it, then run the rest to the ground
> floor. Do I just wire each end up and plug in hub? Or is it more
> complicated?
>
> Also - the terminals in the wall sockets are colour-coded, but it
> doesn't seem to be simply a matter of wiring each filament to the
> relevant colour - there are terminals labelled A and B and stuff.
>
> Does anyone know of any diagrams I can look at?
>
>
this might help:

http://www.linksys.com/faqs/default.asp?fqid=20

--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form che...@prodigy.net.

CJT wrote:
> Jonathan wrote:
>
>> Having established that running a CAT6 cable from my attic room to the
>> lounge will be OK, I now have a totally newbie question about wiring:
>>
>> I've got some CAT6 terminal sockets for the walls and would like to
>> run the cable into the bedroom, break it, then run the rest to the
>> ground floor. Do I just wire each end up and plug in hub? Or is it
>> more complicated?
>>
>> Also - the terminals in the wall sockets are colour-coded, but it
>> doesn't seem to be simply a matter of wiring each filament to the
>> relevant colour - there are terminals labelled A and B and stuff.
>>
>> Does anyone know of any diagrams I can look at?
>>
>>
> this might help:
>
> http://www.linksys.com/faqs/default.asp?fqid=20
>

Great - I'll have a read of that over the weekend and see if I can work
it out. For some reason I was finding it really difficult to find any
wiring diagrams with Google.