Wireless vs hard wire switching

Does anyone know of a setting that will allow the hard wire to hit the
network before the wireless hits the network? Basically I need the nics to
first detect a hard wired network and use it, instead of both connecting.

Both are connecting to the network. The wireless via the wireless router and
the hard nic as it should. The problem is, this is a windows 2003 domain and
the wirless card is picking up the routers dns entries which will not allow
it to login to the domain.

"Diamontina Cocktail" wrote:

>
> "SteveW" <(E-Mail Removed)> wrote in message
> news:130DFDA1-5B18-44CC-8FF3-(E-Mail Removed)...
> > Does anyone know of a setting that will allow the hard wire to hit the
> > network before the wireless hits the network? Basically I need the nics
> > to
> > first detect a hard wired network and use it, instead of both connecting.
>
> I cant answer that question but I, too, have 2 machines wired and connected
> to a third that is wired and wi-fi at the same time. So what are the
> problems you are experiencing? There may be some other answer.
>
>
>

"SteveW" <(E-Mail Removed)> wrote in message news:130DFDA1-5B18-44CC-8FF3-(E-Mail Removed)...
> Does anyone know of a setting that will allow the hard wire to hit the
> network before the wireless hits the network? Basically I need the nics to
> first detect a hard wired network and use it, instead of both connecting.

the IP metric parameter.

--PA