wireless USB hub IP address

I have a linksys wireless usb adapter installed on a
windows 98se machine. There are no driver/irq conflicts
in device manager. There is plenty of signal from the
router. When I try to pull an IP adress I keep getting
the windows default for no DHCP (169.xxx.xx.xx). the
router is straight out of the box with all factory
defaults set. the computer that's hardwired has no
problems can access the internet with no problem. Any
Ideas??

In article <087101c38c78$51361990$(E-Mail Removed)>, "Tommy Williams"
<(E-Mail Removed)> wrote:
>I have a linksys wireless usb adapter installed on a
>windows 98se machine. There are no driver/irq conflicts
>in device manager. There is plenty of signal from the
>router. When I try to pull an IP adress I keep getting
>the windows default for no DHCP (169.xxx.xx.xx). the
>router is straight out of the box with all factory
>defaults set. the computer that's hardwired has no
>problems can access the internet with no problem. Any
>Ideas??

Does the USB adapter's configuration utility show that it has a
connection to the wireless router?

Do the USB adapter and the wireless router have identical WEP
encryption settings?
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm