Are wireless transmissions error corrected??

If you print via 802.11b is the connection error free via protocol or can
you get errors? I am printing remotely via my LInksys BEFW11S4 and I get
funny black blocks in my printout. I have updated the driver in both the
sending PC and the PC to which the printer, a Lexmark Z45 is connected.
When printed locally, this error is not seen.

--
Bob Alston

bobalston9 AT aol DOT com

I Print wirelessly and have no problems. I suggest to check the firmware on
your Router/access point


"Bob Alston" <(E-Mail Removed)> wrote in message
news:Afzqb.13645$L77.1399@fed1read03...
> If you print via 802.11b is the connection error free via protocol or can
> you get errors? I am printing remotely via my LInksys BEFW11S4 and I get
> funny black blocks in my printout. I have updated the driver in both the
> sending PC and the PC to which the printer, a Lexmark Z45 is connected.
> When printed locally, this error is not seen.
>
> --
> Bob Alston
>
> bobalston9 AT aol DOT com
>
>

TCP/IP is corrected dude ditch the lexamark an get an HP
On Thu, 6 Nov 2003 15:42:56 -0600, "Bob Alston" <(E-Mail Removed)>
wrote:

>If you print via 802.11b is the connection error free via protocol or can
>you get errors? I am printing remotely via my LInksys BEFW11S4 and I get
>funny black blocks in my printout. I have updated the driver in both the
>sending PC and the PC to which the printer, a Lexmark Z45 is connected.
>When printed locally, this error is not seen.

Dain DUDE opined:
>TCP/IP is corrected dude ditch the lexamark an get an HP

His Lexmark works correctly in local mode, so that's not it. Perhaps the
drivers, but not the hardware.
Regards,
Martin