Networking Forums

Networking Forums > Wireless Networking > Wireless Networks > Wireless Stops Working

Reply
Thread Tools Display Modes

Wireless Stops Working

 
 
Norbert Lieckfeldt
Guest
Posts: n/a

 
      08-30-2004, 09:24 AM
I am using a Frisbee Wireless network, with Win XP (SP2). I have an ADSL
router which connects to the wireless base station. It used to work, but
has stopped recently, for no reason which is apparent to me.

Network set-up:

ADSL router is 192.168.0.1
Wireless base station is 192.168.0.2
the IP address used by the card is 192.168.0.10

I can ping all three addresses when I am on the wired connection; when I
plug in the card it shows me 100% connectivity (Signal Strength and Link
Quality). I have set up the network connection on my computer to use the
following tcp/ip settings:

USe following IP Address: 192.168.0.10
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1

Preferred DNS Server 192.168.0.1

I have tried turning off the firewall (McAfee) but to no avail. I have
switched off the Windows firewaal on the network connections.

Any thoughts where else I could look would be most appreciated!

N.
 
Reply With Quote
 
 
 
 
Quaoar
Guest
Posts: n/a

 
      09-05-2004, 12:28 AM

"Norbert Lieckfeldt" <(E-Mail Removed)> wrote in message
news:Xns955569E739A6Anlieckfeldtnet@130.133.1.4...
>I am using a Frisbee Wireless network, with Win XP (SP2). I have an
>ADSL
> router which connects to the wireless base station. It used to work,
> but
> has stopped recently, for no reason which is apparent to me.
>
> Network set-up:
>
> ADSL router is 192.168.0.1
> Wireless base station is 192.168.0.2
> the IP address used by the card is 192.168.0.10
>
> I can ping all three addresses when I am on the wired connection; when
> I
> plug in the card it shows me 100% connectivity (Signal Strength and
> Link
> Quality). I have set up the network connection on my computer to use
> the
> following tcp/ip settings:
>
> USe following IP Address: 192.168.0.10
> Subnet mask: 255.255.255.0
> Default gateway: 192.168.0.1
>
> Preferred DNS Server 192.168.0.1
>
> I have tried turning off the firewall (McAfee) but to no avail. I have
> switched off the Windows firewaal on the network connections.
>
> Any thoughts where else I could look would be most appreciated!
>
> N.


Try this: Open the TCP/IP properties of the connection, General tab,
Advanced properties, Options tab, TCP/IP filtering properties, check
Enable, select Permit All for all three entries, apply, then uncheck
Enable. See if that helps.

Q


 
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Netgear wireless hub frequently stops working / disappears duncan.mostest@googlemail.com Wireless Internet 0 10-17-2007 04:50 PM
wireless internet stops working at times mussashimits Wireless Internet 2 06-16-2007 06:25 AM
Wireless network stops working T rumble Wireless Networks 3 08-09-2006 05:31 PM
Wireless adapter stops working when changing USB port Carl Broadband Hardware 0 09-27-2004 09:09 PM
SMC SMC2804WBR wireless stops working craig Windows Networking 0 11-29-2003 09:12 PM



1 2 3 4 5 6 7 8 9 10 11